Onyx Stone Vessel Sink, Red
Send a spec. Get a real quote in 12h.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
12 consecutive years at KBIS and IBS.
Standard on every shipment.
Red Onyx, Ø420
An onyx stone vessel sink recorded as red onyx
Onyx is a specification decision, not a substitution. SP081 carries red onyx, polished, in the Ø16.5 inch round body.
Two colour references, one code
The material is recorded as red onyx while the colour chip held against the code reads a warm sand tone. Approve the colour on a physical sample before the scheme closes.
One basin, one focal point
A stone like this usually goes into a powder room or a suite bathroom where a single piece carries the scheme.
The stone vessel basin range carries the quieter stones in the same body.
Fit & Clearance
Nothing recessed, everything on show
Ø420 across and 140 mm proud of the counter, Ø16.5 by 5.5 inches. Everything above the worktop stays in view.
Vessel mounting means the counter is cut for the waste and nothing else. The basin is visible from every side, so it is protected in transit and set last on site.
One piece per room is the usual count on a stone like this, so state the crating requirement per piece in the RFQ and inspect on arrival rather than at the point of setting. A replacement on a low count line is a fresh production run, not a stock pull.
Set the basin after the wet trades have finished on site.
Construction & Finish
Red onyx, polished, approved on a sample
Red onyx with a polished finish is what the record carries.
Colour is signed off on stone
A screen colour and a stone name are not an approval. Ask for the sample against SP081 and sign it before production starts.
The record does not describe how the basin is worked or finished beyond the polished note. Leave anything further off the submittal until it is confirmed.
Keep the stone name on the PO line and on the carton label.
Compliance
Nothing claimed beyond what is recorded
Both are issued against the model code so the stone and the size read the same on every document.
No approval scheme is recorded for SP081, so nothing of the kind is stated here or on a quotation.
What is required changes with the destination market. Name yours on the enquiry and it is answered with the quote.
Procurement
Low counts on a feature stone
The factory quotes small feature lines beside the volume codes.
A feature basin is rarely a large count. Several codes can sit on one order, so a low quantity of onyx moves with the rest of the schedule.
Feature stones ship in small counts, so own label cartons and printed artwork are quoted with them under the SANIKB OEM and ODM programme. The answer is back within 12 hours.
Include these details with the RFQ
- Quantity by model code
- Colour approved on a physical sample
- Stone and finish written per line
- Counter drawing with waste opening
- Carton marking and artwork
- Destination port and Incoterm
- Target shipment date
50 pcs is the MOQ even on a feature stone. Confirm the count at quote.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request