Tiered Fossil Stone Vessel Sink, Stepped Ringed Shell Basin
Send a spec. Get a real quote in 12h.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
12 consecutive years at KBIS and IBS.
Standard on every shipment.
Carved Detail
Stepped rings cut into a fossil stone bowl
SP179 is a round fossil limestone basin, 16.5 in across and 5.5 in tall. The outer wall is stepped in concentric rings rather than left smooth.
Tiers machined into the wall
Each ring is cut into the same block, so the steps hold their line all the way round. Side light picks up the shadow between tiers.
Shell marks between the tiers
Pale shell fossils cross the steps in a near-black ground referenced at #25221F. The cut exposes a different section on every bowl.
Showrooms use it as the sculptural piece against the plain bowls in our stone vessel basin program.
Fit & Clearance
420 mm overall with the steps inside the footprint
The widest ring sets the footprint. Measure to that, not to the rim.
Leave clear counter around the piece so the stepped profile stays visible from the side. Pushed against a backsplash, the detail disappears.
Stepped edges are the first thing to catch during handling. Plan storage so pieces are not stacked rim to rim.
Step count and spacing are fixed by the approved drawing for your order.
Construction & Finish
Fossil limestone machined into tiers
Fossil limestone is the listed material here, and polished is the listed finish.
Steps machined, then finished
The tiers are cut from the solid rather than applied. Finishing follows the steps so the whole surface reads the same.
Fossil density varies through the block, so some bowls show heavy shell across the steps and others show very little. Agree an acceptable range if you are selling from a single photograph.
Ask for batch photographs before shipment if the range matters to your customer.
Compliance
Handling and marking for a shaped piece
Carton marking, labels and handling instructions follow the brief you provide with the purchase order.
SP179 has no certification mark on its specification, so none appears here. Ask for the document list for your market when you raise the RFQ.
Tell us what handling and fragile marking your warehouse and carrier require. Marking requirements are set in the order, not assumed from a standard carton.
Procurement
Ordering the tiered SP179 basin
Order terms for the tiered model.
Step count, ring spacing and overall height are tooling decisions, so they can be drawn to your own design under the SANIKB OEM and ODM program.
Shaped models take more machining time than plain bowls, so confirm quantities early if your delivery week is fixed.
Include these details with the RFQ
- Model SP179 and quantity
- Required delivery week
- Destination port and Incoterm
- Acceptable fossil density range
- Own-brand carton artwork
- Sample approval before machining
The stated lead time assumes the step profile is approved unchanged.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request