Pot Filler Faucet

Pot filler kitchen faucets are wall- or deck-mounted, articulating taps installed above or beside the cooktop, with a folding double-jointed arm that swings out to fill large pots in place and folds back when idle. The range is built in solid brass and stainless steel for residential kitchens and hospitality projects, and sits within SANIKB's wider kitchen faucet range. Custom finishes, arm reach and rough-in configuration are available on request.

Service
OEM / ODM · free mold from 300 pcs
MOQ
20 ft / 40 ft containersBelow 1 container: your own China forwarder required.
Lead time
30–45 days after sample
3 products

Mount, metal, finish count

Three pot filler faucet builds, measured against each other

This pot filler faucet line has three models, and they differ on the three points that drive a stocking decision. One sits on the deck, two hang on the wall; one is brass, two are 304 stainless steel; one ships in four finishes, two in a single finish.

SANIKB DL-05 205 Pot Filler product photo
ModelMountBodyFinishesSizeMOQ
Deck, two handlesDL-05 205DeckBrassBrushed Gold, Brushed Nickel, Chrome, Matte BlackConfirm on drawing100 pcs
Wall, traditionalFYF-05042Wall-mounted304 stainless steelBrushed Nickel20" (514 mm) extended reach x 7" (178 mm) height; folds to 10.3" (262 mm)100 pcs
Wall, modernFYF-05040Wall-mounted304 stainless steelBrushed Nickel11.2" x 3.7" (284.5 x 93 mm)100 pcs

MOQ is the same 100 pcs on all three, so the minimum order does not favor any one model; the choice comes down to mount type, body metal and finish breadth.

What the numbers actually say

Reading the size data on each pot filler

SANIKB FYF-05042 Pot Filler product photo

FYF-05042 is the only model with a full arm dimension set: 514 mm at full extension, 178 mm in height, and 262 mm once the arm is folded back. That gives a project buyer three figures to hand to the kitchen designer rather than one overall length.

FYF-05040 is published as 284.5 x 93 mm (11.2" x 3.7") without separate extended and folded figures, so ask for the dimension drawing if the arm geometry matters to your submittal.

Matching account to build

How the three builds split by account

Showroom and e-commerce distributors

DL-05 205 is the one model where you can carry a finish spread from a single SKU family: Brushed Gold, Brushed Nickel, Chrome and Matte Black, all on a brass body. That lets a retailer match the pot filler to whichever kitchen faucet finish already sells.

Builders and renovation contractors

The two wall units, FYF-05042 and FYF-05040, both carry the cUPC tag and are both 304 stainless steel in Brushed Nickel. A contractor standardizing on one finish can split a job between a traditional and a modern look without changing the metal or the finish.

Private label and OEM brands

Use any of the three as a starting point and request your own finish, handle or packaging through the OEM program at /pages/oem-odm-service. Name the base model so the quote starts from a known build.

Shortlist by style cue

Which pot filler to sample first

Brushed nickel wall-mount pot filler for kitchen, solid brass body, double-jointed folding arm — SANIKB FYF-05042.Traditional wall buildOrnate lever handles, and the only model in the group with a published reach: 20" (514 mm) extended, folding to 10.3" (262 mm). Sample it for traditional-style kitchen programs.Brushed stainless steel wall-mount pot filler for the kitchen, folding double-joint arm and dual lever handles — SANIKB FYF-05040.Modern wall buildSame 304 stainless steel and Brushed Nickel as FYF-05042, in a modern-styled wall build with a size of 284.5 x 93 mm.Matte Black — Matte black deck mount pot filler with stepped round base, two pin levers and double-jointed folding arm — SANIKB DL-05 205-BKDeck build, four finishesThe only deck mount pot filler in the group and the only brass body. Pick it when the counter, not the wall, takes the supply, or when finish choice matters more than anything else.

Quoting a pot filler order

Information that gets a pot filler quote back fast

  1. Name model and mount

    List DL-05 205, FYF-05042 or FYF-05040 and confirm deck or wall, since the mount type is fixed per model.

  2. Split quantity by finish

    For DL-05 205, give the count per finish across the four available; the FYF wall units are Brushed Nickel only unless you request a custom finish.

  3. State certification needs

    If the order is for a market that requires cUPC, say so up front so the quote is built on FYF-05042 or FYF-05040, which carry that tag.

  4. Ask for drawings

    Request dimension and rough-in drawings for every model you shortlist, especially DL-05 205, which has no dimensions stated.

  5. Expect a written reply

    Pricing is quoted per order against the 100 pcs MOQ per model, with a written response within 12 business hours.

  1. Wholesale Pot Filler Faucets for Distributors and Builders
  2. Wall Mount Pot Filler Faucet Configurations and Reach Options
  3. Commercial Pot Filler Faucet OEM and ODM Programs

Wholesale Pot Filler Faucets for Distributors and Builders

SANIKB manufactures pot filler faucets at wholesale volumes for kitchen distributors, hospitality groups, and residential project buyers across export markets. Articulating swing-arm models are made in brass or stainless steel, with reach options sized to range and island layouts. Distributors can mix finishes and spout lengths within a single MOQ, and we extend trade pricing and stocking programs for partners carrying our pull-down kitchen faucets alongside this line. Export cartons are double-walled with foam inserts and barcoded for direct retail or warehouse intake.

Wall Mount Pot Filler Faucet Configurations and Reach Options

Select a pot filler faucet by its mounting format before planning the supply position: the current range includes wall and deck arrangements. Compare the chosen arm reach, folded position and outlet height with the range or worktop layout, pot positions and nearby cabinetry. Confirm the connection specification, including whether the selected model uses 1/2 inch NPT, together with the shut-off arrangement and installer’s rough-in requirements. Send the model codes, finishes, quantities and stove/worktop drawings so reach, connection and supply scope are confirmed for the project; one pot-filler configuration does not establish fit across every kitchen. Pair the order with our touchless and sensor kitchen faucets to complete a full kitchen package under one PO.

Commercial Pot Filler Faucet OEM and ODM Programs

For kitchen-supply brands and equipment houses, our commercial pot filler faucet program covers OEM and ODM from logo engraving and custom handle styling to fully bespoke spout geometry and packaging artwork. We support higher-flow valve internals and heavy-duty brass castings suited to restaurant and institutional duty cycles, with sample lead times and pre-production approval at each stage. Brand buyers frequently bundle this line with our pull-out kitchen faucets to ship a coordinated commercial catalog. Documentation, finish swatches, and spec sheets are provided for tender and approval submissions.

Frequently Asked Questions

What is the MOQ for a pot filler kitchen faucet order?

Standard MOQ for a pot filler kitchen faucet is 100 pieces per finish, with lower trial quantities available for first orders and sample evaluation. Mixed-finish purchase orders can combine multiple variants to reach the minimum, which helps distributors test demand before scaling. Buyers stocking our gooseneck kitchen faucets can consolidate both lines into one shipment to optimize freight.

Do you offer a deck mount pot filler faucet instead of wall mount?

Yes. We tool a deck mount pot filler faucet that installs on the countertop or island next to the cooktop for kitchens without an in-wall supply line. The deck mount model pairs a double-jointed folding arm with two lever handles and is offered in matte black, chrome, brushed gold, and brushed nickel. This is a common choice for prep islands paired with our square kitchen faucets.

Can you produce a black pot filler faucet and other custom finishes?

We produce a black pot filler faucet in matte black PVD along with brushed nickel, brushed gold, champagne bronze, oil-rubbed bronze, and polished chrome. Models in this collection are made in brass or stainless steel, and each product page lists the finishes that model is offered in. Custom finish matching to a brand standard is available at OEM volumes; request physical swatches before production sign-off.

Is the brass pot filler faucet body solid brass throughout?

Our brass pot filler faucet uses solid brass for the arm, joints, and spout, not plated zinc, which gives the durability and weight that project and hospitality buyers specify. Spec sheets are available with quotes for tender review.

Will a stove faucet pot filler clear large cookware on a commercial range?

A stove faucet pot filler from our line is built around clearance for tall stockpots, with double-jointed arms that extend across wide gas and induction ranges and fold back when idle. We can tune arm reach and mounting height to a specific range width during the spec stage so the spout centers over front and rear burners. Buyers outfitting full kitchens often add our water filter kitchen faucets at the prep sink in the same order.

How is a pot filler faucet over stove packaged and shipped for export?

Each pot filler faucet over stove ships in a double-walled carton with die-cut foam, instruction sheet, mounting hardware, and a barcoded label ready for retail or DC intake. Master cartons are palletized to optimize container fill, and we handle FOB or CIF terms with documentation for customs clearance. Typical production lead time is 30 to 45 days after sample approval; bundling with other kitchen faucets shortens combined freight timelines.