Beige Marble Corner Vessel Basin, Quarter-Round Fan
Send a spec. Get a real quote in 12h.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
12 consecutive years at KBIS and IBS.
Standard on every shipment.
Corner Geometry
A quarter-round marble basin built for a corner
SP170 is a triangular vessel basin in beige marble, 17.7 in on each straight side. The front edge sweeps in a quarter-round fan.
Two straight sides, curved front
The straight edges tuck into a corner and the curve faces the room. That recovers counter area a round bowl would waste.
100 mm, a low standing rim
The rim sits only 100 mm above the counter. That keeps a corner vanity from feeling tall in a small room.
For compact cloakrooms it pairs with the smaller pieces in our stone vessel basin selection.
Fit & Clearance
450 by 450 mm into a two-wall corner
A corner basin is planned from the walls out, not from the counter front.
Measure 450 mm along each wall from the internal corner. Tiling and wall build-up eat into that dimension, so measure finished surfaces.
With 100 mm of rim height a tall spout will splash. Match tap projection to a shallow bowl and aim the outlet at the drain.
Confirm which wall carries the tap before drawing approval.
Construction & Finish
Beige marble cut to a three-sided plan
The material listed for SP170 is beige marble, finished polished.
Straight edges cut from one block
The two straight sides are machined square to each other. That is what lets the piece sit tight against both walls.
Veining runs through the fan rather than around it, so the pattern reads across the widest part of the bowl. Tone sits in a beige range at #C9B896.
Ask about a honed face if the project prefers matt.
Compliance
Documenting a corner installation
The signed drawing governs corner dimensions. This page is a description, not an installation document.
The SP170 specification names no certification, so this page names none either. State the import country on the enquiry and we confirm what ships with the order.
Corner installations sit outside a standard vanity drawing. Send the wall layout so the approved drawing shows the tap wall and drain position.
Procurement
Ordering the SP170 corner basin
Terms for the corner basin, as published.
A corner basin normally follows the joinery rather than the other way round. Corner angle, side length and rim height are adjustable on the SANIKB OEM and ODM program.
If the basin ships with a matching vanity, send the cabinet drawing so the stone is cut to the joinery.
Include these details with the RFQ
- Model SP170 and quantity
- Wall-to-wall dimensions at the corner
- Tap wall and drain position
- Destination port and Incoterm
- Finish preference, polished or honed
- Sample approval before production
Corner dimensions are confirmed against your site drawing before cutting.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request