Large 32-Inch Single Bowl Undermount Kitchen Sink, 18-Gauge

Start with the cabinet, not the sink. As a stainless steel prep sink or main bowl, SR2319 occupies 32 inches of counter and 19 inches front to back, so it suits a main kitchen position or a dedicated prep wall, not a tight bar run.

Model

SR2319

Overall size

32" x 19" x 10" (812.8 x 482.6 x 254 mm)

Bowl

Single

Corners

Rounded, R10

Mounting

Undermount

Material

SUS304 stainless steel, 18 gauge (1.2 mm)

Type

Handmade undermount

Finish

Brushed stainless

Among undermount stainless steel sinks, SR2319 needs a cabinet wider than the body plus the reveal on each side. Measure the carcase interior, not the door opening.

Reveal type goes into the order file.

SUS304 at 18 gauge (1.2 mm) is the grade and thickness, brushed across the entire body. Brushed stainless is the only finish on this code, and the name belongs on the purchase order line.

Rounded R10 corners shape the inside of the bowl. Use the drawing to read the radius against the cookware and trays the kitchen will use, and confirm it with the spec sheet before the code is specified for the project.

Depth is 254 mm, so confirm the trap and any disposal unit will sit beneath it. Waste position and centre line are shown on the drawing.

SR2319 is handmade, undermount and cUPC certified. Ask for the spec sheet when it goes into a project submittal.

A prep position works when the sink sits between two clear counter zones: one for incoming produce or trays, one for finished work. A 32 inch body leaves less counter either side in a short run, so draw the run to scale first.

For faucet placement, set the faucet on the counter behind the bowl and keep its reach inside the 19 inch front-to-back dimension. An undermount body is installed beneath the stone and has no deck of its own, so the faucet hole is cut in the stone.

Plan the waste early. A single bowl has one drain, so the trap and a disposal unit, if used, share one cabinet bay beneath it.

For multi-unit work, repeat the same cabinet module and the same code. The fabricator can then reuse one template for every counter.

SANIKB makes the whole ladder in the same grade, gauge and brushed finish, so a kitchen can carry more than one of these stainless steel sinks on one specification.

SR3018 sits just under SR2319 at 762 by 457 mm, and SR1515 covers the 381 mm bar position. A project that needs a main bowl, a prep bowl and a bar bowl can run one PO and one container.

MOQ

50 pcs

Lead time

30–45 days after sample approval

Order by model code and confirm on the drawing. The code reads SR2319, and the size is 32 by 19 inches.

Private label cartons, logo and packaging artwork sit inside the SANIKB OEM and ODM program. Quotations return within 12 business hours.

Kitchens that carry several bowl sizes can run one PO and one container. List each model with its quantity, and note whether the cartons need your own artwork, so one quotation covers the whole container and the packaging.