



Double Bowl Undermount Bar Sink 29-1/4 x 18, 13 x 16 Basins Each

Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
7447A is a compact twin-basin bar sink for undermount fitting, 743 × 457 mm overall, with two matching 13" × 16" bowls that suit bar, prep and island counters.
Built in 304 stainless steel with a Brushed Satin face, a 3-1/2" drain opening and underside padding. Gauge and bowl depth are set per order line at the quotation stage.
More in Undermount Kitchen Sinks
20 ft / 40 ft containersBelow 1 container: your own China forwarder required. · Mix models and categories. No retail.
Dimension sheet
Sizes and cut data for 7447A
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
304 STEEL, BRUSHED
Two matched basins in brushed satin 304 steel
Matched basins define this double bowl undermount bar sink: two identical 13 × 16 inch bowls sit in one 29-1/4 × 18 inch body of 304 stainless steel.

Brushed Satin
Same size on both sides
Each basin measures 13 × 16 inches, so the left and right side of the sink match. The drain opening is 3-1/2 inches.
Brushed satin is the finish across the whole stainless steel sink. Sheet is 16 gauge (1.5 mm) or 18 gauge (1.2 mm), chosen per order line, and every gauge is tooled for 7447A.
BASIN LAYOUT
What identical bowls mean for prep sinks and bar sinks
No hand to specify
Both basins measure 13 × 16 inches, so the layout is symmetrical and the order needs no left or right call.
Two stations in one body
One basin can stay for washing while the other is kept for rinsing in this stainless steel body, side by side in a single undermount body.
Depth built in four steps
Choose 6, 7, 8 or 9 inch bowls. Shallow builds leave more service space below the sink. Deeper builds hold more.
7447A DATA
Sizes, depths, gauge and drain in one table
- Model
- 7447A
- Overall size
- 29.3" × 18.0" (743 × 457 mm)
- Bowls
- 13" × 16" each
- Bowl depths
- 6" / 7" / 8" / 9"
- Drain opening
- 3-1/2"
- Gauge
- 16G / 18G (1.5 mm / 1.2 mm)
- Material
- 304 stainless steel
- Finish
- Brushed Satin
CABINET PLANNING
Planning the cabinet for a 29-1/4 inch bar sink
29-1/4 inches wide and 18 inches front to back make 7447A a compact fit for bar, prep and island cabinets, where counter space is short. Measure the cabinet interior, not the door opening, before the sink is specified.
Undermount means the counter edge meets the bowl directly. Check the cutout against the spec sheet before the countertop is cut, and agree the reveal with the fabricator in writing.
With a 3-1/2 inch drain opening, plan the waste connections for both bowls, and confirm the chosen bowl depth leaves room below.
CONTAINER ORDERS
Mixing gauges and depths across one order
Among bar sinks and prep sinks, fifty pieces is the minimum for 7447A, and a mixed 1×20 ft container is accepted. It can ship beside other SANIKB sinks from the same factory, with a quantity listed per line for each gauge and depth.
OEM and private label carton work is offered. Read the OEM and ODM service page, then send logo files and carton requirements with the model code.
Include these details with the RFQ
- Quantity, with gauge and depth split
- Destination port or city
- Other sink models for the same container
- Private label or carton marking
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request
