



93-Degree Sharp Edge Single Bowl Undermount Stainless Steel Sink 22.5x18.5

Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
For 22.5 x 18.5 cutouts, 22189R-T gives you a 20-1/2" × 16-1/2" single bowl with a 93-degree sharp edge, cut from 304 stainless steel and finished in brushed satin. Overall size is 22-1/2" × 18-1/2" (572 × 470 mm).
Gauge choice is 16G or 18G, and five depths run from 6" to 10". We make it ourselves in Foshan, with noise-reduction padding fitted under the bowl and a 3-1/2" drain opening.
More in Undermount Kitchen Sinks
20 ft / 40 ft containersBelow 1 container: your own China forwarder required. · Mix models and categories. No retail.
Dimension sheet
Sizes and cut data for 22189R-T
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
PLAN THE CUTOUT
22.5 x 18.5 undermount single bowl sink
Size the base cabinet to the 22-1/2" × 18-1/2" (572 × 470 mm) outline, and cut the countertop to the 20-1/2" × 16-1/2" bowl with its 93-degree sharp edge.

Brushed Satin
304 stainless steel, brushed satin
One finish and one material across both gauges, so a mixed order looks uniform once installed.
EDGE AND SIZE
Sharp 93-degree edge against its zero-radius sibling
93-degree sharp edge
The bowl wall meets the rim at 93 degrees, giving a near-square edge under the countertop.
Against 22189S
22189S is 22" × 18" with a 20" × 16" bowl and zero-radius corners. This model is larger in both directions.
Five depths
Order 6", 7", 8", 9" or 10", in 16-gauge (1.5 mm) or 18-gauge (1.2 mm) steel.
SIZES
22189R-T sizes and bowl data
- Model
- 22189R-T
- Overall size
- 22.5" × 18.5" (572 × 470 mm)
- Bowl size
- 20-1/2"x 16-1/2"
- Bowl depths
- 6" / 7" / 8" / 9" / 10"
- Drain opening
- 3-1/2"
- Material
- 304 stainless steel
- Gauge
- 16G/18G
- Finish
- Brushed Satin
- Mount
- Undermount
COUNTER FIT
Fitting 22189R-T under the countertop
Below quartz or solid surface countertops, the sharp edge leaves a clean line at the cutout. There is no apron and no top flange; this stainless steel sink is undermount only.
22189S-T shares the 22-1/2" × 18-1/2" outline and bowl size, so the edge profile is the real difference between the two. Quote both while the drawings are still open on that detail.
ROOM PLANNING
Room planning for a 22.5 x 18.5 footprint
Short sink runs in studios, bar corners and compact galleys decide the cabinet before the sink is chosen. Measure the base cabinet inside width first, then compare it with the outline above.
Leave deck space behind the bowl for the faucet. Where a dishwasher or appliance sits beside the sink, check clearances on the plan rather than on site.
Quotations are returned within 12 business hours. Send model, gauge, depth and quantity, or start from undermount kitchen sinks.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request
