



22x18 Zero-Radius Undermount Single Bowl Kitchen Sink, 20x16 Basin

Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB 22189S is a 22 x 18 zero radius undermount sink in 304 stainless steel with a brushed satin finish. One 20" × 16" bowl sits in a 22" × 18" (559 × 457 mm) outline, with a 3-1/2" drain opening.
Choose 16G (1.5 mm) or 18G (1.2 mm) sheet and a bowl depth from 6" to 10". Noise-reduction padding is attached underneath, and each sink ships 1PC / Box from our Foshan factory.
More in Undermount Kitchen Sinks
20 ft / 40 ft containersBelow 1 container: your own China forwarder required. · Mix models and categories. No retail.
Dimension sheet
Sizes and cut data for 22189S
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
COMPACT BUILDS
Compact 22 x 18 zero radius undermount sink
Studio apartments, hotel kitchenettes and staff break rooms rarely have room for a full-size bowl. This 22 x 18 zero radius undermount sink gives them one 20" × 16" bowl inside a 22" × 18" (559 × 457 mm) outline.
Square-cornered bowl
Zero-radius corners keep the 20" × 16" bowl square, so a rectangular tray or pan sits flush against the wall.
Five depths on one tool
Order 6", 7", 8", 9" or 10". Shallow bowls suit low cabinets; the deepest depth takes stock pots.
Two sheet thicknesses
16-gauge (1.5 mm) is the thicker sheet and 18-gauge (1.2 mm) the lighter one. Both share one outline.
SIZE SHEET
22189S footprint, bowl and drain figures
- Model
- 22189S
- Overall size
- 22.0" × 18.0" (559 × 457 mm)
- Bowl size
- 20" X 16"
- Bowl depths
- 6" / 7" / 8" / 9" / 10"
- Drain opening
- 3-1/2"
- Material
- 304 stainless steel
- Gauge
- 16G/18G
- Finish
- Brushed Satin
- Mount
- Undermount
- Packing
- 1PC / Box
Measured outside, the sink is 2" longer and 2" wider than the bowl. Size the base cabinet to clear the outline; take the countertop opening from the 22189S spec sheet.
WHERE IT FITS
Where a 22-inch bowl earns its place
Multifamily developers specify it for studio and one-bedroom units where the sink run is short. A single bowl also leaves counter space for a drying rack or a cutting board.
Hotel and serviced-apartment kitchenettes can keep one sink model across room types. Retail showrooms can display it beside our larger single bowls to show the size step.
Both gauges share the 22" × 18" outline, so switching from 18G to 16G late in a project leaves the countertop cutout unchanged.
COUNTER AND CABINET
Counter and cabinet planning for 22189S
Undermount sinks of this size go under short kitchen runs, wet bars and prep corners. The rim sits below quartz or solid surface countertops, so the stone edge frames the square bowl directly.
Check the cabinet width against the 22" outline and leave deck space behind the bowl for the faucet. Plan the strainer and waste fittings around the 3-1/2" drain opening.
Our longer single bowls add bowl length but need a wider base cabinet. 22189S is the model to quote where the cabinet run cannot take them.
ENQUIRY
What to send for a 22189S quote
A 22189S order needs 50 pcs minimum, packed 1PC / Box. Mixed loading in a 1×20 ft container is accepted, and we reply within 12 business hours.
Details that speed up the quotation
- Model 22189S and quantity
- Gauge: 16G or 18G
- Bowl depth: 6", 7", 8", 9" or 10"
- Destination port and container mix
- Logo or carton changes for private label
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request
