


16-Gauge Ledge 50/50 Double Bowl Undermount Kitchen Sink 33x19, 10" Deep

Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
W3319D(50/50) is an undermount double-bowl ledge sink in 16G 304 stainless steel, 33" × 19" (838 × 483 mm) overall, with an even split between the bowls.
Each bowl is 15" × 15-7/8", 10" deep, with a 3-1/2" drain. Zero or R10 corners can be specified, and our Foshan factory builds the sink and packs it 1PC / Box.
More in Undermount Kitchen Sinks
20 ft / 40 ft containersBelow 1 container: your own China forwarder required. · Mix models and categories. No retail.
Dimension sheet
Sizes and cut data for W3319D(50/50)
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
ZERO OR R10
W3319D 10 inch undermount kitchen sink: radius and ledge
Two options are open on every order of W3319D(50/50): Zero or R10 corners, and a stepped ledge that is already built in. Everything else is fixed, which keeps this 33 x 19 undermount 50/50 double bowl sink simple to specify for a whole project.
Pick one radius per project phase and write it on the order line. The stone fabricator cuts the countertop to the bowl outline, so the radius has to reach the template request, not just the sink order.
Both bowls are 10 inches deep, which makes this a 10 inch deep sink on each side. The rim sits below the counter, so the work surface runs straight to the bowl edge with no lip to wipe around.
BOWL DATA
W3319D(50/50) dimensions and bowl data
- Model
- W3319D(50/50)
- Overall size
- 33.0" × 19.0" (838 × 483 mm)
- Bowls
- 15" x15-7/8" Each
- Bowl depth
- 10"
- Drain opening
- 3-1/2"
- Corner radius
- Zero/R10
- Material
- 304 stainless steel
- Gauge
- 16G
- Mount
- Undermount
- Packing
- 1PC / Box
Equal bowls mean either side can serve as the wash or rinse basin. The interior bowl dimensions are 15" x15-7/8" each, and the exterior dimensions are 33" × 19". A 16G sheet is 1.5 mm thick, so this is 16 gauge stainless steel throughout.
LEDGE LAYOUT
What the ledge and the even split do on site
Stepped ledge
Accessories rest on the sink itself rather than on the counter, which matters when the body is only 483 mm front to back.
Even 50/50 split
Two 15" × 15-7/8" bowls let one person soak dishes while another keeps a basin free.
Zero radius
Square internal corners give a sharper line and tight radius corners, with a tighter fit for rectangular accessories.
R10 radius
A softer radius corner suits residential and mainstream project kitchens and wipes out more easily.
CABINET AND WASTE
Planning two drains under a 33 inch top
Each bowl has a 3-1/2" drain, so the cabinet carries two waste outlets and two drain assembly choices. Decide early whether the plumber runs two lines or joins them below the counter, and leave the space for either choice. Keep the minimum cabinet size at 33 inches wide.
With 483 mm front to back, the faucet and the ledge accessories compete for the same deck. Mark the faucet position on the cabinet drawing before the stone is templated, and check it against the ledge.
Browse our kitchen sinks for single bowl ledge models if one project mixes unit types.
SPEC SHEET
Drawing and spec sheet for W3319D

Spec sheet for this code
Request the W3319D(50/50) spec sheet with your enquiry. It carries the bowl sizes and the radius options, so the sink order and the stone template follow the same drawing.
Each sink is packed 1PC / Box. For a multifamily phase, ask for the carton count per floor before the delivery date is fixed, so the site team can plan receiving. The same spec sheet supports the cutout template.
ORDER AND RFQ
Terms and data for a W3319D quotation
- MOQ
- 50 pcs
- Container
- Mixed 1×20 ft accepted
- Packing
- 1PC / Box
Send the model, radius, quantity and port. Carton marking is arranged through our OEM and ODM service, and the quotation comes back within 12 business hours.
Enquiry checklist
- Corner radius: Zero or R10
- Quantity for each unit type
- Destination port
- OEM carton marking or artwork
- Cabinet drawing, if you want the fit checked
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request
