


Undermount Single Bowl Kitchen Sink with Right Drainboard 840x440mm

Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
Undermount kitchen sink with right drainboard in 304 stainless steel, 840 × 440 mm (33.1" × 17.3") overall. An 800 × 400 mm recess holds a 400 mm square bowl and a 400 mm board, 200 mm deep, with a 3-1/2" drain opening.
Choose 16G or 18G steel and a Zero, R10, R15 or R19 corner. Packed one piece per box, with a minimum order of 50 pcs direct from our factory.
More in Undermount Kitchen Sinks
20 ft / 40 ft containersBelow 1 container: your own China forwarder required. · Mix models and categories. No retail.
Dimension sheet
Sizes and cut data for HM8444DB
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
840 × 440 MM
Single bowl undermount kitchen sink, drainboard on the right
840 mm long and 440 mm front to back, HM8444DB combines a wash bowl and a drainboard in one stainless steel body. Inside that outline, an 800 × 400 mm recess divides into a 400 mm square bowl and a 400 mm board.
The board sits on the right. The bowl stays on the left, and rinsed dishes rest on the board to the right.
As a single bowl undermount sink with drainboard attached, it suits layouts where a separate drying rack would take up counter space.
Confirm on the approved drawing how the stone fabricator should cut for bowl and board together.
DIMENSIONS
HM8444DB measurements, depth and drain
- Model
- HM8444DB
- Overall size
- 33.1" × 17.3" (840 × 440 mm)
- Installation type
- Undermount
- Bowl and board recess
- 800 × 400 mm
- Depth
- 200 mm
- Drain opening
- 3-1/2"
- Gauge
- 16G / 18G
- Corner radius
- Zero / R10 / R15 / R19
- Material
- 304 stainless steel
- Packing
- 1PC / Box
CORNER CHOICE
Zero, R10, R15 or R19 inside the bowl
Zero radius
Sharp internal corners give a crisp, architectural bowl across the full 400 mm width.
R10
A small radius that keeps the square look of this undermount kitchen sink while easing the corners for cleaning.
R15 and R19
Larger radii round the bowl further. Pick them where the project prefers softer corners.
CUTOUT PAPERS
Drawing and spec sheet for the cutout

Layout drawing before fabrication
Ask for the spec sheet and the dimensioned bowl-and-board layout. The overall footprint is not the countertop opening, so the stone fabricator should cut only from the approved drawing. The sink is installed beneath the stone, so cutout and reveal matter as much as the outline.
RFQ DETAILS
Gauge, corner radius and quantity
- Minimum order
- 50 pcs
- Packing
- 1PC / Box
Among stainless steel undermount sinks, HM8444DB is one SKU. The 16G or 18G steel and the corner radius are chosen on the quotation, so state both on every line and ask for the matching drawing.
Send the model and quantity, and we reply within 12 business hours. Private-label cartons and changed sizes go through our OEM and ODM service.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request
