Large Single Bowl Undermount Stainless Steel Kitchen Sink 23×18
Send a spec. Get a real quote in 12h.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
12 consecutive years at KBIS and IBS.
Standard on every shipment.
23 Inch Single Bowl
Twenty three inches where a thirty will not fit
This is the size that gets specified when the cabinet run is short. A stainless steel undermount prep sink at 23 by 18 by 10 inches gives a full depth bowl without asking for a wider carcass.
What else has to fit in the run
Twenty three inches leaves a drawer bank beside the sink where a thirty inch bowl would take the whole run. Check what else has to sit in that stretch of cabinet before the width is fixed.
Width drops, the depth figure does not
Width comes down on this code and the published 10 inch depth does not move with it. That is the trade the schedule is actually making.
Compare it against the wider bodies in the stainless steel kitchen sink collection.
Fit & Clearance
A short run and a full depth bowl
Twenty three inches of bowl going into a short cabinet run. In figures that is 23 by 18 by 10 inches, 584 by 457 by 254 mm.
The sink body is not the cabinet width. Leave the fabricator room for the reveal and the clamps on both sides before the stone is cut.
Get the drawing with the drain centre dimensioned. On a short run the waste position decides whether a bin still fits under the bowl.
Confirm the cabinet interior width in writing before templating.
Construction & Finish
Brushed SUS304 across the whole body
This code shares its material record with the rest of the undermount range: SUS304, 18 gauge, 1.2 mm, brushed stainless.
One clause covers a mixed schedule
Sizes change across a schedule and the material line does not. A mixed order can carry a single material clause with a size table under it.
Handmade undermount is what the type field carries. Process wording stays off the submittal until the factory confirms it in writing.
Name the finish once in the clause and again on every PO line.
Compliance
One market, one set of documents
Issued together against the model code. Ask while the specification is still open.
No scheme, listing or mark is recorded for S2318. None is claimed here or on any document issued for it.
Name the destination market on the enquiry. Documentation is quoted against that market and nothing else.
Procurement
Compact kitchens buy in repeat blocks
SANIKB is the factory, so repeat blocks are quoted as a programme.
A short run kitchen repeats across a building. Several codes can sit on one order when unit types differ, and the inspection stays single.
Custom sizes, own label cartons and logo artwork for a repeat block are handled under the SANIKB OEM and ODM programme. An RFQ is answered within 12 hours.
Include these details with the RFQ
- Quantity by model code and unit type
- Cabinet interior width
- Drain centre and waste routing
- Custom size requirement if any
- Carton marking and artwork
- Destination port and Incoterm
- Target shipment date
MOQ runs at 50 pcs per code across the unit types.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request