Square 17-Inch Undermount Bar & Prep Sink, SUS304 18-Gauge

One code covering a bar, a utility room and a second prep point is what a stocking dealer wants. SR1717 is that code, at 432 mm square and 228 mm deep.

Stock programmes are built from the stainless steel sink range one size at a time.

Size on the record is 432 by 432 by 228 mm.

Overall Size

17.0" x 17.0" x 9.0" (432 x 432 x 228 mm)

Mounting

Undermount, per title and tag

Material

SUS304 stainless steel, 18 gauge (1.2 mm)

Finish

Brushed stainless

The spec record carries no mounting line while the title and the tag both read undermount. Confirm it on the drawing before the top is cut.

Reveal is a fabricator decision. Put positive, flush or negative into the order file.

Ask whether the code ships with clips and a template.

The record lists SUS304 stainless steel at 18 gauge, 1.2 mm, brushed.

Brushed stainless

A grade is a material, not a method

SUS304 names the steel and 18 gauge names the thickness. A dealer holding three sizes wants the same grade line on all three sheets, so sheets are issued per code with grade and gauge stated identically.

Brushed stainless is the only finish published on SR1717, and the finish name goes on the PO line.

Request the spec sheet so the gauge sits on file.

SR1717 is cUPC listed. Fix the listing number and certificate validity in the first order file so a repeat order runs from one record.

A dealer reordering the same code wants the document set fixed once. Confirm the market at first order and it carries forward.

SANIKB is the factory, so a stocking dealer buys direct at code level.

Published MOQ

50 pcs

Standard Lead Time

30–45 days after sample approval

SR1515 sits below it at 381 mm square and SR2318 above it at 584 by 457 mm. The three share grade, gauge and finish, so a container carries a full size ladder under one PO. Private label cartons, logo and packaging artwork run through the SANIKB OEM and ODM program.

Stock list enquiries are answered within 12 business hours.