GL40 Round Spiral Glass Vessel Sink

GL40 is recorded with a spiral swirl wall. Unlike a repeating facet, the pattern has direction and travels around the body.

Direction, facet and flute are three ways of treating the same wall. Compare them in the glass vessel sink range.

Diameter and height both stay moderate here. The record gives 400 mm across and 140 mm high.

Overall size

Ø 15 3/4" × H 5 1/2" (Ø 400 × 140 mm)

Mounting

Above-counter (vessel)

Wall

Spiral-swirl

A 400 mm circle fits most 600 mm vanity tops with room behind for a deck tap. That is why this size tends to survive value engineering when a wider bowl does not.

The 140 mm height still lifts the rim, so check it against the carcass height rather than assuming a standard basin position.

Confirm the tap hole centre distance from the back edge on the drawing.

Five codes are published and the material entry does not move between them.

Ask for the variant chart and pick one or two codes to lead with rather than listing all five. A narrow range is easier to hold on a shelf and simpler to reorder.

Agree the lead code before your photography is commissioned.

GL40 is cUPC listed. The published specification also holds material, type, mount, finish, size and MOQ. Before it goes into a submittal, request the current listing number and certificate validity so the documentation matches your destination market.

If you private label this model, the claims on your packaging become yours. Agree at enquiry what may be printed and what documentation supports it for your market.

GL40 opens at 100 pieces.

Published MOQ

100 pcs

Standard Lead Time

30–45 days (typical)

Own-brand work adds steps before production starts, so artwork approval usually decides the ship date rather than the glass itself. Send files at enquiry, not once the order is confirmed.

Carton, insert and label production sit inside the SANIKB OEM and ODM program.

Work the delivery date backwards from artwork approval, not from order date.