Bathroom Chrome Robe Hook
More in Modern Chrome Bathroom Hardware Set
Mix any models in one 20ft container · no per-model minimum
-
817011Modern Chrome Tumbler HolderWall Mounted
-
817010Commercial Chrome Soap Dish HolderWall Mounted
-
817009Chrome Hand Towel RingWall Mounted
-
817007Single Post Chrome Toilet Paper HolderWall Mounted
-
817006Commercial Chrome Toilet Brush HolderWall Mounted
-
817004Modern Chrome Glass ShelfWall Mounted
-
817003Modern Chrome Towel Rack with BarWall Mounted
-
817001Modern Chrome Towel BarWall Mounted
Styles & finishes
7 finishes available on 817008
Every finish on the same body · 7
- Chrome
- Polished Chrome
- Brushed Nickel
- Polished Gold
- Brushed Gold
- Gun Grey
- Antique Bronze
Name the finish on every line of the purchase order rather than once at the top. Ask for the finish sample card.
Modern Chrome
Every piece below is the same design in the same finish — specified and quoted as one set.
Send a spec. Get a real quote in 12 business hours.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
12 consecutive years at KBIS and IBS.
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Highest Count Line
Chrome bathroom robe hooks, the largest line on the order
Hooks carry the highest quantity and lowest unit value on an accessories order. 817008 is the single hook in the 817 group, the line worth settling before anything else is priced.
The line most often short on site
Hook counts get trimmed during value engineering and added back after handover. Agree the count per room type at enquiry stage so the top up is not a separate shipment.
Sample the finish before the run
A large quantity built to the wrong finish name is expensive to put right. Approve a sample against the recorded name before production is released.
Rails, rings, shelves and holders share this finish list. See the 817 chrome group.
Fit & Clearance
Door swing and clearance around 817008
Wall mounting and the hook format are fixed. Plate size and projection are open.
- Mounting
- Wall mounted
- Product Type
- Robe hook
- Material
- SUS304 stainless steel
- Finish Names on File
- 7
A loaded hook sits proud of the door face, so check the swing before the position is fixed. The robe stops the door closing, not the plate.
Where two hooks share a door back, put the spacing on the drawing.
Construction & Finish
Putting several finishes of one hook on one run
SUS304 stainless steel is on the material line.
Chrome, Polished Chrome, Brushed Nickel, Polished Gold, Brushed Gold, Gun Grey, Antique Bronze
Chrome plus six other names
Chrome, Polished Chrome, Brushed Nickel, Polished Gold, Brushed Gold, Gun Grey and Antique Bronze.
Finish is chosen at order stage, not at range stage, so one part number carries all seven names. A distributor holding orders for three projects can run them together, each line naming its own finish.
Chrome and Polished Chrome are separate entries. Name the exact one on each PO line.
Compliance
Documentation available against 817008
A spec sheet for 817008 can be sent with the quotation.
817008 is cUPC listed. The published specification also holds material, type, mount, finish, size and MOQ. Before it goes into a submittal, request the current listing number and certificate validity so the documentation matches your destination market.
Procurement
Hook quantities inside a nine model 817 order
The 817 group runs to nine models, so hooks are one line among many.
- Published MOQ
- 50 pcs
- Standard Lead Time
- 30–45 days after sample approval
- Quote Reply
- within 12 business hours
The group covers 817001 towel bar, 817003 towel rack with bar, 817004 glass shelf, 817006 toilet brush holder, 817007 toilet paper holder, 817009 towel ring, 817010 soap dish holder and 817011 tumbler holder, bought complete on one PO.
Production is in house. Private label, a finish developed to a brand standard, printed cartons and ODM work run through the SANIKB OEM and ODM program, answered inside 12 business hours.
Include these details with the RFQ
- Hooks per room type and rooms
- Finish name against each model
- Substrate at every fixing
- Full model list
- Destination port and Incoterm
Fifty pieces per model, 30 to 45 days after sample approval.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request