-
Two-Person Corner Whirlpool Tub with Curved Front Window, 59 in
B8007 -
Corner Freestanding Bathtub, Tapered Front, Flared Skirt, 59 & 67 in
D-8303 -
Fluted Corner Bathtub on Plinth Base, Left/Right Hand, 59 & 67 in
CJ01 -
Corner Freestanding Bathtub, Rounded Open End, Left/Right Hand, 67 in
AB03 -
Single-Ended Corner Apron Bathtub, Rounded Outer Corner, 59 & 67 in
FT020/FT021
Send a spec. Get a real quote in 1 business day.
B2B only. Personal follow-up from SANIKB. A SANIKB engineer reads your brief and replies with feasibility, MOQ, lead-time and an itemised price — within 1 business day.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Five shells, one corner
The corner bathtub range at a glance
Every corner bathtub in this group is white acrylic and is placed with two sides to the walls. Beyond that, the five models split into four freestanding corner shells and one corner whirlpool, and the numbers below show how far apart they sit.
- 1500 / 1700 mm
- the two shell lengths offered on the freestanding models (59 or 67 in)
- 750–800 mm
- width band of the four freestanding shells (29.5 to 31.5 in)
- 580–600 mm
- freestanding shell height, CJ01 lowest at 22.8 in
- 20 pcs
- MOQ on the B8007 whirlpool; the freestanding models start at 35 pcs per 1×40HQ
Only the B8007 breaks the pattern: a 1500 × 1500 mm footprint at 570 mm high, jetted, with deck-mounted fittings instead of a separate tub filler.
Hand, backrest, jets, filler
All five models side by side
Length alone does not separate these shells, because three of them are made at both 1500 and 1700 mm. The columns that change the order are the backrest layout, whether a left or right version exists, how the faucet mounts and the minimum quantity.
Swipe to compare all specifications
| Model | Size (L × W × H, mm) | Backrest | Left / right | Faucet mount | MOQ | |
|---|---|---|---|---|---|---|
 Single-Ended Corner Apron Bathtub, Rounded Outer Corner, 59 & 67 in | FT020/FT021 | 1500 / 1700 × 750 × 600 | Single ended | — | Floor or wall | 35–40 pcs · 1×40HQ |
 Corner Freestanding Bathtub, Rounded Open End, Left/Right Hand, 67 in | AB03 | 1700 × 780 × 600 | Double ended | Yes | Floor or wall | 35 pcs · 1×40HQ |
 Fluted Corner Bathtub on Plinth Base, Left/Right Hand, 59 & 67 in | CJ01 | 1500 / 1700 × 750 / 800 × 580 | Double ended | Yes | Floor or wall | 35–40 pcs · 1×40HQ |
 Corner Freestanding Bathtub, Tapered Front, Flared Skirt, 59 & 67 in | D-8303 | 1500 / 1700 × 780 × 600 | Double ended | Yes | Floor or wall | 35–40 pcs · 1×40HQ |
 Two-Person Corner Whirlpool Tub with Curved Front Window, 59 in | B8007 | 1500 × 1500 × 570 | Double ended | — | Deck mounted | 20 pcs · 1×40HQ |
The AB03 is the one freestanding shell made in a single length, 1700 mm. The CJ01 is the only one whose width changes with length: 750 mm on the short shell, 800 mm on the long one.
Who orders corner shells
Buyers this collection is set up for
These are the trade buyers the five models are set up to serve, and what each one tends to need from the range.
Distributors stocking both hands
The AB03, CJ01 and D-8303 each come as a left and a right version. A stocking order can split quantity between the two so a dealer can serve either corner from shelf.
Contractors on repeat bathroom layouts
When one layout repeats across a project, scheduling a single model and length means one spec sheet and one MOQ line to track.
Private-label importers
All five shells are white acrylic and cUPC certified. Private-label orders are handled through our OEM/ODM service page.
Projects specifying jets
Where a brief calls for two bathers and jets, the B8007 is the only model here that meets it, with two headrests and a handheld shower on the deck.
Match the shell to the spec
Which corner bathtub matches the brief
Start from the one requirement your drawing or client will not move on, then read across to the model.
One reclining endFT020/FT021 is the single-ended option, a rectangular shell with an apron on its two open sides and one rounded outer corner. Pick it when the design calls for a backrest at one end only.
Plain finish, long shellAB03 suits a 67-inch spec with no surface pattern; its open end is rounded and the squared end carries flat decks.
Textured frontCJ01 adds vertical fluting over a plinth base, and at 1700 mm it is the widest freestanding shell in the group at 800 mm.
Flared skirtD-8303 tapers along the front and flares out where the skirt meets the floor, in both lengths.
Two bathers with jetsB8007 combines whirlpool jets, a curved clear front and a black grab rail; its lower 20 pcs MOQ also suits a smaller trial order.Four questions that settle the order
Four questions that settle the order
Answer these four points in your first message, line by line, so the quote covers hand, filler and quantity for each model.
Which model and which length?
Name the model for each line, plus 1500 or 1700 mm where the model is made in both. For the CJ01, the length also fixes the width, so state it even if the drawing already shows it.
Left or right?
For the AB03, CJ01 and D-8303, give the hand per line and the quantity of each. If you need both hands, list them as separate lines.
How will the filler be mounted?
The four freestanding shells take a separate floor-standing or wall-mounted filler, which you can source from our freestanding tub faucet range. The B8007 has deck-mounted fittings, which the quote confirms.
Quantity, label and destination
Give the total per model against its MOQ, whether you need private-label branding, and the destination port. Pricing is quoted per order, and you get a written reply within 12 business hours.
- Freestanding Corner Tubs: FT020/FT021, AB03, CJ01, D-8303
- The B8007 Two-Person Corner Whirlpool Tub
- Specifying a Corner Tub: Length, Hand and Tub Filler
Freestanding Corner Tubs: FT020/FT021, AB03, CJ01, D-8303
Each freestanding corner tub has its back against one wall and one end against another. The FT020/FT021 is rectangular with one rounded outer corner, a front and end apron, a slim rim and a single-ended backrest. The AB03, CJ01 and D-8303 pair a squared wall end with a rounded open end and an oval, double-ended basin.
Their details differ: the AB03 is smooth, with a thin front rim and wider flat decks at the squared end; the CJ01 has vertical fluting and a plinth base; the D-8303 has a front skirt that flares out at the floor.
The B8007 Two-Person Corner Whirlpool Tub
The B8007 is a two-person corner whirlpool tub with a fan-shaped 59 × 59 in footprint and a height of 22 in. Its curved front is a clear see-through panel with a full-width black grab rail across it, and two black headrests sit one on each side of the basin. Whirlpool jets are set into the basin, two chrome spouts sit on the back wall, and a handheld shower is mounted on the deck; it is the only model in this collection with one. Other jetted models are listed under whirlpool tubs.
Specifying a Corner Tub: Length, Hand and Tub Filler
The collection filters by length: 55 to 59 inch covers the 1500 mm models and 64 to 67 inch covers the 1700 mm models. Widths on the freestanding corner tubs run from 30 to 31 in (750 to 800 mm) and heights from 23 to 24 in (580 to 600 mm). The AB03, CJ01 and D-8303 come in left and right versions, so the squared end can sit against the end wall on either side. The four freestanding models are set up for a tub filler on the floor or a wall.