Round Ceramic Vessel Sink with Built-In Faucet Deck, 18"

These are the confirmed dimensions for model SN103, taken from the spec drawing and listed in metric and imperial.

• Type: round above-counter ceramic vessel sink with integrated faucet deck
• Material and finish: glazed ceramic, white
• Outer diameter: 460 mm (18.1 in)
• Overall height: 150 mm (5.9 in)
• Faucet hole: one pre-drilled hole, Φ35 mm (1.4 in), on the raised rear deck
• Drain opening: Φ45 mm (1.8 in), accepts a standard 1.75 in vessel pop-up
• Drain well diameter: Φ70 mm (2.8 in)
• Mounting: above-counter (vessel), sits on top of the finished surface

The 18 inch label is a rounded reference. The confirmed outer diameter is 18.1 in (460 mm).

The faucet deck is what separates this model from a plain round vessel basin. The single pre-drilled hole at Φ35 mm (1.4 in) takes a single-hole vessel faucet, which stands taller than a standard deck faucet so the spout clears the rim of the raised bowl.

Mounting the faucet on the deck keeps the counter solid with no faucet cutout. That suits buyers working with pre-fabricated vanity tops, prefinished stone, or tight schedules where on-site drilling adds labor and risk, and it fixes the faucet position on every unit, which matters for showrooms holding a set display and for developers standardizing a fixture package.

The basin is glazed ceramic in white. The fired glaze is hard and non-porous, so it wipes clean and resists staining in daily use, which holds up under the frequent cleaning common in hospitality and multifamily bathrooms.

White is a neutral that pairs with most countertop materials, cabinet finishes, and faucet styles, a practical default for project specifications and for distributors stocking across multiple buyers.

This is an above-counter, or vessel, basin. It sits on top of the finished counter rather than dropping into a cutout, so the counter needs only an opening for the drain and supply lines. Because the basin sits on top, the finished rim height is the counter height plus the 5.9 in (150 mm) basin height, the figure to check against the chosen faucet so the spout clears the bowl.

The drain opening accepts a standard vessel pop-up, and drain hardware is available on request to match the basin. The deck-mounted faucet and the standard drain opening keep the rough-in straightforward.

The model is specified and stocked across a range of B2B channels:

• Bathroom-fixture distributors and importers holding inventory for regional dealers and contractors
• Private-label brands selling under their own name
• Multifamily and residential developers outfitting units at scale
• Hospitality FF&E buyers specifying guest-bath fixtures
• Kitchen and bath showroom dealers presenting vessel options on display vanities
• Plumbing and general contractors installing in renovation and new-build work
• E-commerce resellers listing the basin online
• Architects and spec writers matching the basin to project drawings and a specified faucet

For projects that repeat the same bathroom many times, the integrated faucet deck and fixed faucet position give a uniform look without extra on-site work.

SANIKB manufactures the basin factory-direct and supplies it as an OEM ceramic vessel sink for ODM and private-label buyers. Options include custom packaging, logo placement, and branded spec sheets, set per program. Buyers developing a private-label line can request samples for approval before a production run, and program terms are confirmed at quotation. Request OEM pricing or samples to start a program.

Order terms are set per program. MOQ and lead time are confirmed at quotation based on volume, finish, and any custom requirements, and samples are available on request for evaluation and private-label approval.

Export packaging is built for ceramic shipped over long distances, with protective packing to reduce breakage in parcel, LTL, and container freight. Carton and pallet configurations are provided on request to help buyers plan landed cost and container loading. To move forward, request a bulk quote, request samples, or send your project specs to the SANIKB OEM team.