Beige Oval Dish Vessel Sink
The beige oval dish vessel sink has a low sweeping ceramic bowl with a continuously curved oval outside outline. Its factory photograph shows pale beige surfaces with fine mottling and a reflective circular waste position in the floor. The inner walls curve gently into the low central area, with no separate tap platform interrupting the rim. The complete top plan shows an ellipse rather than four straight upper sides or a shape with parallel middle runs. In the side drawing, curved walls meet a short flat lower line. The full outside measurements are 510 × 350 × 95 mm. Specify this low dish profile by its actual outer shape and complete height when coordinating the countertop.
Shape & size
Shape and size of SHY-434D20
Continuously curved oval outline
The upper body has no straight middle runs
The complete native top plan shows an ellipse around the bowl. The exterior has no four straight sides or parallel straight middle runs. Its unequal 510 mm and 350 mm horizontal spans describe that oval outside outline.
Low sweeping dish profile
Curved sides reach a short flat lower line
The original full side drawing shows a shallow dish-shaped outside profile. Curved sides meet a short flat lower line under the central bowl. The 95 mm measurement applies to the entire outside height, rather than an independently stated internal depth.
Fine mottling on pale beige
The visible ceramic surfaces remain lightly patterned
The factory photograph shows pale beige or cream surfaces with fine mottling across the bowl and exterior. The catalogue identifies a ceramic basin. That light pattern does not establish a natural stone body or a separate stone material specification.
Reflective circular floor waste
The inner curves lead to the low floor area
The photograph shows gently curved inner walls leading to a low floor area with a reflective circular waste position. The rim has no separate tap platform. The pictured waste does not by itself define a supplied fitting package.