Rounded Rectangular Concrete Basin

FR is the standard finish on C0036, and full-body cement, particle and two-tone programmes are the alternatives. Whichever one you pick, the body stays 450 mm long and 300 mm front to back, with corners rounded instead of cut square.

Overall size

17.7" × 11.8" × 4.7" (450 × 300 × 120 mm)

Length

450 mm (17.7")

Width

300 mm (11.8")

Height

120 mm (4.7")

Model code

C0036

Shape

Rectangular

Mounting

Above-counter (vessel)

Colour

Grey

Material

Concrete

The 120 mm body height matches most of our compact concrete basins, so a mixed range can share one tap specification.

Drill the waste hole from the drawing rather than from a scaled image.

C0036 is tagged grey and carries no ornament on its body, so it sits easily beside timber, stone or painted joinery.

Every casting shows its own tone. Where several rooms in a project sit side by side, fix one approved sample as the standard for the whole order.

In the rectangular concrete sink group, C0036 has the smallest footprint of our rectangular concrete basins.

If you plan to offer more than one finish programme, order a sample of each, so the showroom can display them side by side before the range is fixed.

Showrooms can set C0036 next to a round vessel, so buyers compare two outlines that need a similar amount of counter.

A vessel basin sits on the counter, so the top only needs a waste hole, with the tap drilled through the top or fed from the wall. Mark both from the drawing and check the plumbing position before the top is cut to size.

On a compact counter, leave clear space behind the basin for the tap body and its handle before the top is ordered.

In a hotel bathroom, the straight back wall of C0036 can sit close to the splashback, leaving the front of the counter free for amenities.

Ask for the spec sheet and design drawing early, so the vanity maker, the plumber and the tiler all work from one document.

C0036 ships with other SANIKB concrete models, so a small run of compact basins can join a larger bathroom package. Plan the container by listing every model and the quantity of each.

For a multi-room project, tell us the room count, the finish programme and any packaging marks at the start. We then match drawings, spec sheets and cartons in one pass, so nothing is reworked after casting.

Distributors building a concrete range can stock it alongside the larger rectangles, giving their buyers a compact size for powder rooms and a longer one for main bathrooms.

Private-label cartons and logo marking are quoted together with the basins through our OEM and ODM service.