16 Inch Round Concrete Vessel Sink

Measured edge to edge, C0012 spans Ø15.7" (Ø400 mm) and stands 4.7" (120 mm) above the counter. The vanity top needs only one round clear zone and a waste hole, with the tap set behind it.

These figures give a joiner or vanity-top maker everything needed to set out the counter.

Overall size

Ø15.7" × 4.7" (Ø400 × 120 mm)

Diameter

Ø400 mm (Ø15.7")

Height

120 mm (4.7")

Model code

C0012

Shape

Round

Mounting

Above-counter (vessel)

Colour

White

Material

Concrete

Hand-cast concrete carries a small dimensional tolerance, so drill the waste hole from the drawing rather than from a scaled photo.

Each C0012 is cast and finished by hand. The outside keeps a textured, cement-style surface, which sets it apart from glazed ceramic or stone-look basins on the same shelf.

Inside, the bowl is finished smooth and light, so the textured shell frames the water area rather than sitting in it.

That contrast suits rooms built from raw materials: timber vanities, stone tops and plaster walls in hotel and residential bathrooms.

Ask for care and sealing guidance with the sample, so the maintenance routine can be handed to housekeeping or the end owner at handover.

A round bowl suits repeated guest bathrooms, because every vanity top takes the same drilling and the same tap position. Hotel and residential developers can specify one basin for a whole floor.

Contractors fitting out apartment vanity packages get one drilling pattern for every unit. That keeps the joinery order simple and lets the tops be made before the basins arrive on site.

Showroom and retail chains use C0012 as the plain round reference in a concrete display, next to shaped pieces. The full round concrete sink range shows the other sizes on offer.

With the quantity, colour and port in one message, we can check C0012 against the drawing and size the cartons in a single reply.