Charcoal Solid Surface Kitchen Sink with Drainboard

RSCC is a matte charcoal solid surface drop-in kitchen sink with an integrated drainboard, made in three sizes. RSCC860 and RSCC900 have one bowl; RSCC1150 has two.

Charcoal is a different sell to stainless and needs its own display space. Position it within the drop-in kitchen sink range rather than beside the steel.

All three codes are 500 mm front to back. The 200 mm height is the bowl body below the rim, and the deck edge is 8 mm thick. Length and bowl layout change with the code.

Mount

Drop-In

Type

Drop-in kitchen sink with drainboard

Finish

Matte Charcoal

Sizes

860 / 900 / 1150 × 500 × 200 mm

RSCC860 has one bowl, 435 mm long and 450 mm front to back. RSCC900 adds 40 mm of overall length and carries a 455 × 450 mm bowl. RSCC1150 keeps the 435 × 450 mm main bowl and adds a 325 × 340 mm second bowl between it and the drainboard.

On all three sizes the bowls sit on the left and the ribbed drainboard on the right, with one tap hole in the rear deck. Left and right hand layouts are not interchangeable once a counter is cut, so check the hand against the cabinet plan.

Request the dimensioned drawing for the code you order before the worktop is cut.

Colour is the line that will be checked hardest on this reference.

Matte Charcoal

Matte charcoal on all three codes

The body is solid surface in a matte charcoal finish, with the bowls, deck and ribbed drainboard in one integrated piece.

Matte charcoal has to be approved from a physical sample of the actual reference, not from a screen. Get that sample in front of the worktop and cabinet samples before anything is signed off.

Where several units go to one project, agree the acceptable shade variation in writing.

RSCC860, RSCC900 and RSCC1150 are cUPC listed. The published specification also holds material, type, mount, finish, size and MOQ. Before they go into a submittal, request the current listing number and certificate validity so the documentation matches your destination market.

Put the destination market and the reference split in the same RFQ. The document answer comes back per code, in writing.

This is a programme commitment rather than a sample order.

Published MOQ

300 pcs

Standard Lead Time

30–45 days (typical)

MOQ is 300 pcs, a number to plan a range around, so settle the split between the single-bowl RSCC860 and RSCC900 and the double-bowl RSCC1150 before you settle the total.

Colour development, alternative deck layouts and private label packaging are handled through the SANIKB OEM and ODM program, with quote requests answered within 12 business hours.

Confirm whether the minimum applies per reference or across the series when you request the quotation.