Rectangular Alcove Whirlpool Bathtub with Headrest, 59 in
SANIKB 6111 is a rectangular alcove whirlpool bathtub in white acrylic with a skirted front, a single black headrest and a deck faucet set. Both SKUs measure 1500 × 800 × 680 mm (59 × 31.5 × 26.8 in): 6111L and 6111R are the L and R versions. A spout and a hand shower sit between four valve knobs on the back deck, a chrome grab handle curves over the front rim and a chrome towel bar runs along the apron. 6111 is cUPC certified, and a written quote on either version is returned within 12 business hours.
See the SANIKB whirlpool tub range.
More in Alcove Bathtubs
MOQ per model · one 40HQ container, quantity set by tub size
-
G-908Alcove Whirlpool Bathtub with Hourglass Basin, 63 in63" × 31.5" × 23.6"Three-wall alcove
-
FT072Alcove Whirlpool Tub with Apron Front, Single-Ended, 71 in71" × 31.5" × 23.2"Three-wall alcove
-
D-1022Rectangular Alcove Bathtub with Apron Front and End Drain, 60 in60" × 29.9" × 18.5"Three-wall alcove
-
BTS603260x32 Acrylic Skirted Apron Bathtub60" × 31 1/2" × 21 1/16"Alcove
-
BTS603060x30 Acrylic Alcove Bathtub60" × 30" × 22"Alcove
-
BTA603260x32 Acrylic Alcove Bathtub60" × 31 7/8" × 22"Three-wall alcove
Tub sheet
Size and installation of 6111
Every option below is a produced configuration with its own SKU. 1 size × 2 hands. Name the exact SKU on each purchase order line.
Order codes
| SKU | Size | Hand |
|---|---|---|
| 6111L | 59" x 31" | Left-hand |
| 6111R | 59" x 31" | Right-hand |
Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.
Send a spec. Get a real quote in 12 business hours.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
12 consecutive years at KBIS and IBS.
Standard on every shipment.
Whirlpool & Deck
Skirted alcove whirlpool tub with a back-deck faucet set
6111 is a rectangular whirlpool tub for a three-wall alcove, with the finished apron on the open front. The faucet set runs along the back deck, and a single headrest is fitted at one end.
Spout, hand shower and four valve knobs
The back deck holds a spout and a hand shower set between two pairs of valve knobs. Whether this faucet set ships with the tub or is quoted as a separate line is agreed at quotation.
Black headrest, grab handle, apron towel bar
A black headrest on two chrome posts sits at one end. A curved grab handle is mounted on the front rim, and the apron carries a chrome towel bar plus a triple chrome rail at its other end.
Other three-wall options are in the alcove bathtub collection.
Fit & Handing
1500 × 800 mm alcove footprint in L or R
6111 is 1500 mm (59 in) long, 800 mm (31.5 in) wide and 680 mm (26.8 in) high. The L and R SKUs share the same dimensions.
- 6111L
- 59" × 31.5" × 26.8" (1500 × 800 × 680 mm)
- 6111R
- 59" × 31.5" × 26.8" (1500 × 800 × 680 mm)
- Installation
- Alcove, skirted front
- System
- Whirlpool
Pick the L or R version by the plumbing end of the alcove. The drain and whirlpool equipment positions for each version are confirmed on the approved drawing.
Set the tile line against the 680 mm (26.8 in) height shown on the approved drawing.
Construction & Finish
White acrylic shell with chrome fittings
The 6111 shell and apron are formed from pure acrylic sheet in white.
White
One color for both versions
6111 is made in white only, so L and R units in the same order match on site.
The grab handle, towel bar and faucet set are separate chrome fittings. Ask at quotation which of them ship with the tub and how each one is packed.
The chrome towel bar and the triple chrome rail are mounted on the face of the apron and project into the room, so allow for them when setting clearance to a vanity or a door.
Record any transit damage to the apron or rim in writing when the goods arrive.
Compliance
cUPC certification for 6111
Ask for 6111 documents by model, and list the deck faucet set as its own line if it is ordered with the tub.
6111 is cUPC certified. Request the certificate number and its validity before the tub goes into a submittal.
State the destination market in the enquiry, along with any documents needed for the whirlpool pump and controls, and a written reply on 6111 follows within 12 business hours.
Procurement
Ordering 6111 in L and R
6111 comes as two SKUs, 6111L and 6111R. Quantities per version and the scope of the deck fittings are written into the quotation.
- Standard Lead Time
- 30-45 days after sample approval
- Quote Reply
- Sent within 12 business hours
Give the L and R quantities separately so each is quoted as its own line. Both 6111 versions follow the standard lead time of 30-45 days after sample approval. Private label 6111 orders are handled through the SANIKB OEM and ODM program.
Include these details with the RFQ
- 6111L and 6111R quantities, stated separately
- Destination market, port and electrical supply
- Faucet set, grab handle and towel bar: included or not
- Brand marking on cartons
- Requested shipping window
The 6111 lead time is a planning figure until the quotation confirms it.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request