Black Two-Tone Double-Ended Freestanding Tub, 58-70 in
SANIKB D-8012 is a double-ended freestanding bathtub in gloss acrylic, made with a black exterior and a white interior. Its walls taper toward the floor below a flat rim band, and it is made in four sizes: D-8012-150 at 1485 x 805 x 580 mm (58 x 31.7 x 22.8 in), D-8012-155 at 1550 x 795 x 580 mm (61 x 31.3 x 22.8 in), D-8012-165 at 1640 x 795 x 580 mm (65 x 31.3 x 22.8 in) and D-8012-178 at 1775 x 800 x 580 mm (70 x 31.5 x 22.8 in).
D-8012 is cUPC certified. The flat rim band has no tap holes, so a floor-standing or wall-mounted filler is used. See more black bathtubs.
More in Black Bathtubs
MOQ per model · one 40HQ container, quantity set by tub size
-
D-8025Black Rolled-Rim Double Slipper Freestanding Tub, 69 in69" × 32.7" × 34.8"Freestanding
-
D-8098WBBlack Two-Tone Double Slipper Freestanding Tub, Raked End, 67 & 71 in67" / 71" × 31.5" × 28.3"Freestanding
-
D-8075WBBlack Slipper Soaking Tub with White Interior on Plinth Base, 67 in67" × 31.5" × 26.8"Freestanding
-
FT083Black Rectangular Freestanding Tub with Flared Trapezoid Sides, 70 in70" × 31.5" × 22.8"Freestanding
-
FT013/FT014/FT023/FT024Black Rectangular Freestanding Tub, White Interior, 55-71 in55" / 59" / 67" / 71" × 29.5" / 31.5" × 23.2"Freestanding
-
D-8061ATwo-Tone Gloss Black Box Freestanding Tub, White Rim, 59-71 in59" / 67" / 71" × 31.5" × 23.6"Freestanding
-
D-8016ABlack Box-Shaped Freestanding Tub with White Interior, 59 & 67 in59" / 67" × 29.5" / 31.5" × 23.6"Freestanding
-
FT091Black Oval Double-Ended Freestanding Tub, White Interior, 62 in62" × 28.7" × 23.2"Freestanding
-
FT029–FT031Black Exterior Double-Ended Oval Freestanding Tub, 59-67 in59" / 63" / 67" × 31.5" × 23.6"Freestanding
Tub sheet
Size and installation of D-8012
Every option below is a produced configuration with its own SKU. 4 sizes. Name the exact SKU on each purchase order line.
Order codes
| SKU | Size |
|---|---|
| D-8012-150 | 58" x 32" |
| D-8012-155 | 61" x 31" |
| D-8012-165 | 65" x 31" |
| D-8012-178 | 70" x 31" |
Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.
Compare · 4 sizes
Size & spec comparison
| 58" x 32"D-8012-150 | 61" x 31"D-8012-155 | 65" x 31"D-8012-165 | 70" x 31"D-8012-178 | |
|---|---|---|---|---|
| Overall L×W×D | 58″ × 31.7″ × 22.8″ 1485 × 805 × 580 mm | 61″ × 31.3″ × 22.8″ 1550 × 795 × 580 mm | 65″ × 31.3″ × 22.8″ 1640 × 795 × 580 mm | 70″ × 31.5″ × 22.8″ 1775 × 800 × 580 mm |
Common specs above apply to every size; the table compares only what changes by size. Custom sizes available for OEM/ODM.
Send a spec. Get a real quote in 12 business hours.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
12 consecutive years at KBIS and IBS.
Standard on every shipment.
Color & Shape
Two-tone freestanding tub: black outside, white inside
D-8012 is made in black: the black covers the exterior, while the basin is white, so the tub reads as a dark form with a bright interior.
Stadium plan, semicircular ends
Both ends of the plan are semicircular and the outline is symmetric. The drain is centered, so either end can be used as the backrest.
Tapered walls, flat rim band
The outer walls taper inward toward the floor, and the top is finished with a flat rim band. A round overflow sits on one long side rather than at either end.
Other dark-finish models are collected in the black bathtub range, and more plan shapes are grouped under freestanding tubs.
Four Lengths
Four lengths from 58 to 70 inches
D-8012 keeps a 580 mm (22.8 in) height across all four SKUs. Width is 805 mm (31.7 in) on the 58 inch size, 795 mm (31.3 in) on the 61 and 65 inch sizes and 800 mm (31.5 in) on the 70 inch size.
- D-8012-150
- 1485 x 805 x 580 mm (58 x 31.7 x 22.8 in)
- D-8012-155
- 1550 x 795 x 580 mm (61 x 31.3 x 22.8 in)
- D-8012-165
- 1640 x 795 x 580 mm (65 x 31.3 x 22.8 in)
- D-8012-178
- 1775 x 800 x 580 mm (70 x 31.5 x 22.8 in)
The drawing gives inner depths of 440 mm (17.3 in) and 450 mm (17.7 in) with a center drain. The rim has no tap holes, so the filler is set out on the floor or the wall rather than on the tub.
The four widths differ by up to 10 mm. Take the width from the SKU you order, not from the range as a whole.
Material & Finish
Two-tone gloss acrylic, black outside and white inside
D-8012 is formed from pure acrylic sheet with a gloss surface. The exterior is black and the interior white.
Black exterior with white interior
Confirm the color split
D-8012 is made black outside and white inside. Confirm the color split on the inquiry so it is written into the quotation and matched on the approval sample.
A dark gloss exterior shows scuffs and fingerprints readily during handling and installation. Agree protective wrapping in the packing specification, and how marks found on arrival are recorded.
Keep the approved sample as the reference for both the black and the white surfaces.
Compliance
cUPC certification for all four D-8012 sizes
When an order combines lengths, list each D-8012 SKU in the document request so the paperwork covers every size delivered.
D-8012 is cUPC certified across its four sizes. Ask for the current certificate and validity date against each SKU being specified.
Where a colored tub needs design approval as well as a certificate, send both requests with the inquiry. The quotation, issued within 12 business hours, sets out what will be supplied.
Procurement
Ordering D-8012 across four lengths
SANIKB manufactures D-8012 in four lengths, each quoted as its own SKU.
- Standard Lead Time
- 30-45 days after sample approval
- Quote Reply
- Written quote within 12 business hours
Four lengths between 58 and 70 inches let one model cover several room sizes in a project. Give a quantity per SKU, and ask for the sample in the length you will order in greater numbers, since lead time starts from sample approval.
Include these details with the RFQ
- Quantity per SKU: D-8012-150, D-8012-155, D-8012-165, D-8012-178
- Exterior and interior color
- Destination market and port
- Floor-standing or wall-mounted filler
- Carton marking and labels
- Target ship date
Four-size orders are scheduled in the quotation; until then the lead time is indicative.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request