Black Rectangular Freestanding Tub with Flared Trapezoid Sides, 70 in
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB FT083 is a double-ended rectangular freestanding bathtub with a black acrylic exterior and a white basin. Its sides flare outward from a narrower flat base up to a slim rim, so the end view is an inverted trapezoid. It is made in one size, SKU FT083, at 1780 × 800 × 580 mm (70 × 31.5 × 22.8 in).
The slim rim has no tap holes, so FT083 is filled from a floor-standing or wall-mounted faucet. A quote request for FT083 is answered within 12 business hours. Other dark exteriors are grouped under black bathtubs.
More in Black Bathtubs
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of FT083
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Profile & Color
Inverted-trapezoid sides in black over a white basin
FT083 is rectangular in plan. Its outer walls lean outward as they rise, so the flat base is narrower than the rim.
Narrow base, wide rim
Seen from the end, the tub forms an inverted trapezoid. The flat base is set in from the rim outline, and the flare runs up to a slim rim.
Black outside, white inside
The outer shell is black and the basin is white, so the dark shell frames a light bathing surface. Both ends are shaped alike, so either end can take the backrest position.
Compare other dark exteriors in the black bathtub range.
Fit & Footprint
1780 mm long, narrower at the floor
FT083 is 1780 mm (70 in) long, 800 mm (31.5 in) wide and 580 mm (22.8 in) high. The flared shell is widest at the rim.
- FT083
- 70" × 31.5" × 22.8" (1780 × 800 × 580 mm)
- Layout
- Double-ended, flared sides
- Faucet Mounting
- Floor-standing or wall-mounted
Because the walls flare, the base footprint is smaller than the rim outline. Plan clearances to the 1780 by 800 mm rim rather than to the base.
Read the drain location off the approved drawing before the floor waste is fixed.
Material & Finish
Two-tone acrylic, black and white
FT083 is made from pure acrylic sheet, black on the exterior with a white basin.
Black exterior with white interior
Write the color split into the order
Specify black outside and white inside on the enquiry, and check both on the approval sample before production starts.
A dark exterior shows handling scuffs more readily than white. Ask for full-cover wrapping on the black sides and inspect them as each carton is opened.
The approval sample is the reference for the black shell and the white basin alike.
Compliance
Compliance documents for FT083
Have the black exterior stated against FT083 on the packing list so arriving units can be checked against it.
For a submittal, request the current certificate and its validity under FT083.
Put the destination market on the FT083 enquiry; the written reply on the black tub follows within 12 business hours.
Procurement
Ordering FT083
FT083 is made on a lead time of 30-45 days after sample approval.
- Standard Lead Time
- 30-45 days after sample approval
- Length
- 1780 mm (70 in)
The approval sample settles the black tone, the white basin and the rim edge before the production run starts.
Include these details with the RFQ
- Quantity of FT083
- Floor-standing or wall-mounted faucet
- Black exterior and white basin confirmed
- Destination market and port
- Wrapping for the black sides
- Shipping window
The quotation, once issued, confirms the lead time.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request