Black Exterior Double-Ended Oval Freestanding Tub, 59-67 in
SANIKB FT029–FT031 wraps a capsule-oval, double-ended freestanding bathtub in a black exterior, with a white interior and a slim white rim above it. The acrylic body tapers toward the base, stands flat on the floor and drains at the center. Every size shares an 800 mm width and a 600 mm height, and only the length changes: FT029 is 1500 × 800 × 600 mm (59 × 31.5 × 23.6 in), FT030 is 1600 × 800 × 600 mm (63 × 31.5 × 23.6 in), and FT031 is 1700 × 800 × 600 mm (67 × 31.5 × 23.6 in). The white rim has no tap holes, which leaves the two-tone shell uninterrupted; fill it from a floor-standing or wall-mounted filler. FT029–FT031 is cUPC certified.
Other dark models are grouped in the SANIKB black bathtubs collection.
More in Black Bathtubs
MOQ per model · one 40HQ container, quantity set by tub size
-
D-8025Black Rolled-Rim Double Slipper Freestanding Tub, 69 in69" × 32.7" × 34.8"Freestanding
-
D-8098WBBlack Two-Tone Double Slipper Freestanding Tub, Raked End, 67 & 71 in67" / 71" × 31.5" × 28.3"Freestanding
-
D-8075WBBlack Slipper Soaking Tub with White Interior on Plinth Base, 67 in67" × 31.5" × 26.8"Freestanding
-
FT083Black Rectangular Freestanding Tub with Flared Trapezoid Sides, 70 in70" × 31.5" × 22.8"Freestanding
-
FT013/FT014/FT023/FT024Black Rectangular Freestanding Tub, White Interior, 55-71 in55" / 59" / 67" / 71" × 29.5" / 31.5" × 23.2"Freestanding
-
D-8061ATwo-Tone Gloss Black Box Freestanding Tub, White Rim, 59-71 in59" / 67" / 71" × 31.5" × 23.6"Freestanding
-
D-8016ABlack Box-Shaped Freestanding Tub with White Interior, 59 & 67 in59" / 67" × 29.5" / 31.5" × 23.6"Freestanding
-
FT091Black Oval Double-Ended Freestanding Tub, White Interior, 62 in62" × 28.7" × 23.2"Freestanding
-
D-8012Black Two-Tone Double-Ended Freestanding Tub, 58-70 in58" / 61" / 65" / 70" × 31.3" / 31.5" / 31.7" × 22.8"Freestanding
Tub sheet
Size and installation of FT029–FT031
Every option below is a produced configuration with its own SKU. 3 sizes. Name the exact SKU on each purchase order line.
Order codes
| SKU | Size |
|---|---|
| FT029 | 59" x 31" |
| FT030 | 63" x 31" |
| FT031 | 67" x 31" |
Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.
Compare · 3 sizes
Size & spec comparison
| 59" x 31"FT029 | 63" x 31"FT030 | 67" x 31"FT031 | |
|---|---|---|---|
| Overall L×W×D | 59″ × 31.5″ × 23.6″ 1500 × 800 × 600 mm | 63″ × 31.5″ × 23.6″ 1600 × 800 × 600 mm | 67″ × 31.5″ × 23.6″ 1700 × 800 × 600 mm |
Common specs above apply to every size; the table compares only what changes by size. Custom sizes available for OEM/ODM.
Send a spec. Get a real quote in 12 business hours.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
12 consecutive years at KBIS and IBS.
Standard on every shipment.
Color & Shape
Black exterior, white interior, capsule oval
FT029–FT031 pairs a black outer shell with a white interior and a slim white rim. In plan it is a capsule oval, and the body tapers toward the base.
White inside, black outside
Black covers the exterior only. The interior and the rim are white, so the black reads as a band of color below a white edge.
Center drain, floor or wall filler
The drain is at the center, so neither backrest end carries it. The rim has no tap holes, and the tub is filled from a floor-standing or wall-mounted filler.
Plain white outlines of similar size are in the freestanding bathtub range.
Fit & Sizes
Three lengths at 800 mm wide and 600 mm high
FT029–FT031 is made at 1500, 1600 and 1700 mm long. Width stays at 800 mm (31.5 in) and height at 600 mm (23.6 in) across all three.
- FT029
- 59" × 31.5" × 23.6" (1500 × 800 × 600 mm)
- FT030
- 63" × 31.5" × 23.6" (1600 × 800 × 600 mm)
- FT031
- 67" × 31.5" × 23.6" (1700 × 800 × 600 mm)
- Faucet Mount
- Floor-standing or wall-mounted
Because width and height do not change between sizes, a project can fit one length per room type and keep the same rim height throughout. The tub sits flat on the floor with no feet, and the center drain falls under the middle of the basin.
Confirm the drain and filler positions against the approved drawing for each length before the floor is prepared.
Construction & Finish
Pure acrylic sheet with a black outer finish
FT029–FT031 is formed from pure acrylic sheet. Black covers the exterior, while the interior and rim are white.
Black exterior with white interior
Match the black across the order
The sheen of the black exterior is confirmed on the approval sample. Check the sample next to black faucets or hardware, and keep one order on one production run.
Dark exteriors show scuffs and dust more readily than white during handling, so agree protective film or wrapping in the packing specification.
Inspect the black shell on arrival and note any marks at delivery; scuffs on a dark surface are easier to settle when they are recorded straight away.
Compliance
cUPC certification for FT029–FT031
Name FT029, FT030 or FT031 in the request so each certificate file matches its length.
FT029–FT031 is cUPC certified in each length. Request the certificate number and validity before the tub goes into a submittal, and name the market the order is for.
Document requests are answered along with quotations, within 12 business hours.
Procurement
Ordering FT029–FT031 across three lengths
Every length carries a separate SKU. Quantities for the 1500, 1600 and 1700 mm versions are written as separate lines on the quotation.
- Lengths
- 1500 / 1600 / 1700 mm
- Standard Lead Time
- 30-45 days after sample approval
Approve the black finish on the sample before production starts, since the lead time is counted from that approval. Private label marking for the black tubs is handled through the SANIKB OEM and ODM program.
Include these details with the RFQ
- Quantity for each of FT029, FT030 and FT031
- Filler type planned: floor-standing or wall-mounted
- Destination market and port for the black tubs
- Certificate documents needed
- Carton and brand marking
- Shipping window
Take the lead time as indicative until the quotation confirms it.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request