Two-Tone Gloss Black Box Freestanding Tub, White Rim, 59-71 in
SANIKB D-8061A is a two-tone rectangular freestanding bathtub in acrylic: glossy black vertical skirts around a white interior and a wide, flat white rim. The box has square corners and a centered drain. Three sizes share the 800 mm width and 600 mm height: 1500 x 800 x 600 mm (59 x 31.5 x 23.6 in) as D-8061A-150, 1700 x 800 x 600 mm (67 x 31.5 x 23.6 in) as D-8061A-170 and 1800 x 800 x 600 mm (71 x 31.5 x 23.6 in) as D-8061A-180.
The wide rim has no tap holes; the faucet is a floor-standing or wall-mounted filler. D-8061A is cUPC certified, with a quote reply within 12 business hours. See the black bathtub collection.
More in Black Bathtubs
MOQ per model · one 40HQ container, quantity set by tub size
-
D-8025Black Rolled-Rim Double Slipper Freestanding Tub, 69 in69" × 32.7" × 34.8"Freestanding
-
D-8098WBBlack Two-Tone Double Slipper Freestanding Tub, Raked End, 67 & 71 in67" / 71" × 31.5" × 28.3"Freestanding
-
D-8075WBBlack Slipper Soaking Tub with White Interior on Plinth Base, 67 in67" × 31.5" × 26.8"Freestanding
-
FT083Black Rectangular Freestanding Tub with Flared Trapezoid Sides, 70 in70" × 31.5" × 22.8"Freestanding
-
FT013/FT014/FT023/FT024Black Rectangular Freestanding Tub, White Interior, 55-71 in55" / 59" / 67" / 71" × 29.5" / 31.5" × 23.2"Freestanding
-
D-8016ABlack Box-Shaped Freestanding Tub with White Interior, 59 & 67 in59" / 67" × 29.5" / 31.5" × 23.6"Freestanding
-
FT091Black Oval Double-Ended Freestanding Tub, White Interior, 62 in62" × 28.7" × 23.2"Freestanding
-
FT029–FT031Black Exterior Double-Ended Oval Freestanding Tub, 59-67 in59" / 63" / 67" × 31.5" × 23.6"Freestanding
-
D-8012Black Two-Tone Double-Ended Freestanding Tub, 58-70 in58" / 61" / 65" / 70" × 31.3" / 31.5" / 31.7" × 22.8"Freestanding
Tub sheet
Size and installation of D-8061A
Every option below is a produced configuration with its own SKU. 3 sizes. Name the exact SKU on each purchase order line.
Order codes
| SKU | Size |
|---|---|
| D-8061A-150 | 59" x 31" |
| D-8061A-170 | 67" x 31" |
| D-8061A-180 | 71" x 31" |
Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.
Compare · 3 sizes
Size & spec comparison
| 59" x 31"D-8061A-150 | 67" x 31"D-8061A-170 | 71" x 31"D-8061A-180 | |
|---|---|---|---|
| Overall L×W×D | 59″ × 31.5″ × 23.6″ 1500 × 800 × 600 mm | 67″ × 31.5″ × 23.6″ 1700 × 800 × 600 mm | 71″ × 31.5″ × 23.6″ 1800 × 800 × 600 mm |
Common specs above apply to every size; the table compares only what changes by size. Custom sizes available for OEM/ODM.
Send a spec. Get a real quote in 12 business hours.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
12 consecutive years at KBIS and IBS.
Standard on every shipment.
Color & Form
Black skirts, white basin and rim
D-8061A pairs glossy black outer walls with a white interior and a white rim. The walls are vertical and the corners square, so the black reads as four flat panels.
Black outside, white inside
The skirts are black from the floor up to the rim, while the rim and the basin are white, so the bathing surface stays white.
Wide flat white rim
The rim is flat and wide on all four sides, framing the black box in a white band. There are no tap holes in it; faucets are floor-standing or wall-mounted.
Other dark-exterior models are in the black bathtubs collection.
Fit & Drain
1500 to 1800 mm long, 800 mm wide
All three D-8061A sizes are 800 mm (31.5 in) wide and 600 mm (23.6 in) high, with a drawn inner depth of 470 to 480 mm (18.5 to 18.9 in). The lengths are 59, 67 and 71 in.
- D-8061A-150
- 59" × 31.5" × 23.6" (1500 × 800 × 600 mm)
- D-8061A-170
- 67" × 31.5" × 23.6" (1700 × 800 × 600 mm)
- D-8061A-180
- 71" × 31.5" × 23.6" (1800 × 800 × 600 mm)
- Drain Position
- Center: 750, 850 or 900 mm from end; 400 mm from side
The vertical skirts put the black panels right at the floor line, so the tub reads as a solid block. With the drain centered on both axes, the waste position follows the length: 750, 850 or 900 mm from the end.
The drain offset changes with each length, so read the figure for the ordered size from the approved drawing.
Material & Finish
Gloss black and white acrylic
D-8061A is formed from pure acrylic sheet with a gloss finish; the skirts are black and the interior and rim are white.
Black exterior with white interior
Black panels, white bathing surface
Only the outside walls are black. The basin a bather touches and the rim stay white.
Gloss black surfaces show dust, scratches and fingerprints more readily than white. Agree before shipment how cosmetic marks on the skirts are judged at inspection.
Keep the approved sample's black as the standard for production batches.
Compliance
cUPC certification for D-8061A
Name D-8061A and the length on every document so the two-tone model is not mixed up with an all-white tub.
D-8061A is cUPC certified. Request the certificate record with the three SKUs, D-8061A-150, D-8061A-170 and D-8061A-180, named on it.
The destination market decides which documents are needed, so include it in the enquiry. Replies are written within 12 business hours.
Procurement
Ordering D-8061A
D-8061A is quoted per length, and lead time is 30-45 days after sample approval.
- Standard Lead Time
- 30-45 days after sample approval
- Quote Reply
- within 12 business hours
Approve the black and white on one sample before production, and check the line where the white rim meets the black skirt.
Include these details with the RFQ
- Quantity per length: D-8061A-150, D-8061A-170, D-8061A-180
- Floor or wall faucet
- Sample SKU to approve
- Destination market and port
- Carton marking
- Shipping window
The quoted lead time runs from the date of sample approval.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request