Wedge Profile Slipper Soaking Tub with Raked Backrest, 67 in
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB D-8065 is a freestanding slipper soaking tub in white acrylic with a wedge profile: one end wall rakes steeply outward as the backrest, while the opposite end stands almost vertical. The plan is a rounded rectangle that narrows from the backrest end toward the drain end, and the base sits flat on the floor. D-8065 is the one size, 1700 × 800 × 660 mm (67 × 31.5 × 26.0 in). The rim has no tap holes, so the tub takes a floor-standing or wall-mounted filler. Enquiries are answered within 12 business hours.
Find other single-ended shapes in the slipper tub range.
More in Slipper Tubs
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of D-8065
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Wedge Profile
Raked backrest, upright foot end
The two ends of D-8065 are drawn differently. The backrest end leans outward at a steep rake and carries the rim up to 660 mm (26.0 in); the foot end is close to vertical.
Steep outward lean at the head
The raked end wall is the reclining surface. Because it leans out, the rim at that end projects past the base, so allow for it when the tub is set near a wall.
Plan narrows toward the drain
Seen from above, D-8065 is a rounded rectangle with an asymmetric outline, wider at the backrest end and narrower at the drain end.
Deep single-ended tubs also appear in the soaking tub collection.
Fit & Waste
Drain 230 mm in from the narrow end
D-8065 is 1700 mm (67 in) long, 800 mm (31.5 in) wide at the backrest end and 660 mm (26.0 in) high there.
- D-8065
- 67" × 31.5" × 26.0" (1700 × 800 × 660 mm)
- Drain Position
- 230 mm (9.1 in) from narrow end, 400 mm (15.7 in) from side
- Inner Depth
- 470 mm (18.5 in) at drain end
- Base
- Flat to floor
The waste sits close to the upright end, only 230 mm (9.1 in) in, so the floor outlet is roughed in near that end of the layout. A floor filler at the same end stays clear of the raked backrest.
Take the waste setting-out from the approved D-8065 drawing.
Material & Color
Raked end formed in white acrylic
D-8065 is made from pure acrylic sheet in white, with a slim rim and a base that rests directly on the floor.
White
Rake and shell in white
The outward rake of the backrest is formed in the same white shell as the rest of the tub. Hold the approved sample as the reference for shape and surface.
The outward-leaning end overhangs the base and is the first point to take a knock in a carton. Ask how that end is supported and padded for transit.
Inspect the raked end and the rim before signing for delivery.
Compliance
Compliance documents for D-8065
Document requests for D-8065 need only the single SKU, D-8065.
Compliance documents for D-8065 are matched to your destination market. Ask for the document details against D-8065 before the tub goes into a submittal.
Tell us the destination market in the first message; a written answer follows within 12 business hours.
Procurement
Ordering D-8065
There is one size of D-8065 to quote, made on a standard lead time of 30-45 days after sample approval.
- SKU
- D-8065
- Standard Lead Time
- 30-45 days after sample approval
Where the room plan puts the backrest against a wall, send the layout with the enquiry so the projection of the raked end can be checked against the drawing.
Include these details with the RFQ
- Quantity of D-8065
- Floor filler or wall-mounted spout
- Waste fitting and finish
- Destination market and port
- Carton or private-label marking
- Shipping window
Mark on the layout which wall the raked end will face.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request