Two Tap Hole Single Bowl Countertop Basin
The two tap hole single bowl countertop basin combines two rear tap positions with one continuous ceramic bowl. D577-100A has a full-width rear deck, with a hole toward each end rather than one central tap hole. Beneath the deck, the uninterrupted inner basin has no dividing wall. One floor drain and a round opening in the rear inner wall complete the visible arrangement. Its white rectangular body measures 1000 × 460 × 130 mm overall. The factory lists above-counter mounting. The straight outside faces give this wide configuration a box profile, while the two-hole deck distinguishes it from a single-tap version.
Shape & size
Shape and size of D577-100A
Two holes in one rear deck
Separated tap positions across the basin width
The full-width ceramic deck has one tap position toward each end. The original plan confirms two holes rather than a single central drilling.
A single uninterrupted interior
One bowl below the two-hole deck
The interior extends across the body without a dividing wall. Two tap positions do not turn this ceramic bowl into two separate compartments.
Round overflow and one floor drain
Separate bowl openings beneath the rear deck
The round overflow is visible in the inner rear wall. One central drain sits in the bowl floor, distinct from the two deck holes.
Straight rectangular outside faces
A wide box profile for above-counter mounting
The exterior uses straight front and side walls around the broad interior. The source identifies above-counter mounting for this 1000 mm body.
1000 × 460 × 130 mm overall
Keep the complete D577-100A configuration
The suffix identifies this two-hole model. The published dimensions describe the full ceramic body; they do not specify internal depth or tap-hole spacing.
D577-100A
1000 × 460 × 130 mm
Specify D577-100A with two rear tap holes
- D577-100A — 1000 × 460 × 130 mm
- Required quantity