Tapered Oval Slipper Soaking Tub, White Acrylic, 67 in
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB D-8075 is a single slipper soaking tub in white acrylic, freestanding, with a slim rim that climbs from the foot end to one raised backrest. In plan the oval tapers: it is wider at the backrest end and narrower where the drain sits. It is made in one size, D-8075-170, at 1700 × 800 × 680 mm (67 × 31.5 × 26.8 in), and the drawing marks inner depths of 475 and 490 mm. The rim has no tap holes; D-8075 is fed by a floor-standing or wall-mounted filler. Quotes for D-8075 are returned within 12 business hours.
Compare other raised-back profiles in the SANIKB slipper tub collection.
More in Slipper Tubs
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of D-8075
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Profile & Plan
One raised backrest over a tapered oval
D-8075 rises to 680 mm (26.8 in) at the backrest end, and the slim rim slopes down from there to the foot end. The drawing shows a plan that tapers along its length and has rounded ends.
Full height at the head end
The 680 mm figure is taken at the raised end. Because the rim drops toward the opposite end, the foot end of D-8075 stands lower than the 680 mm overall height.
Broad at the shoulders, narrow at the feet
The outline of D-8075 is broad under the backrest and narrows toward the drain end, which finishes in a tighter rounded curve.
Single- and double-ended tubs in other plans sit in the freestanding bathtub range.
Fit & Drain
Drain 320 mm from the low end
D-8075 is built only as D-8075-170: 1700 mm (67 in) long, 800 mm (31.5 in) wide and 680 mm (26.8 in) high at the backrest.
- D-8075-170
- 67" × 31.5" × 26.8" (1700 × 800 × 680 mm)
- Drain Position
- 320 mm (12.6 in) from low end, 400 mm (15.7 in) from side
- Inner Depth
- 475 and 490 mm (18.7 and 19.3 in) on drawing
- Faucet Mount
- Floor or wall
At 400 mm from the side, the drain falls on the center line of the 800 mm width, so the floor waste is set 320 mm in from the foot end on that line. A floor filler placed at the foot end keeps the spout away from the reclining position.
Set out the waste from the approved D-8075 drawing before the floor is finished.
Material & Color
Pure acrylic in white, one slim rim line
The shell is formed from pure acrylic sheet in white and finished at the top with a slim rim.
White
One color on one SKU
D-8075 is made in white only, so a multi-room order carries one color across every unit. The surface finish is confirmed on the approval sample.
The raised end is the tallest part of the shell and meets any impact first when a carton is tipped. Ask how that end is braced in the packing.
Check the raised end for marks, and note any damage before the delivery note is signed.
Compliance
Compliance documents for D-8075
Quote D-8075-170 on every document request so the paperwork and the order line refer to the same tub.
Request the certificate reference and its validity date against D-8075-170 when the tub is written into a submittal.
State the destination market in the first enquiry so the documents match it; expect the reply within 12 business hours.
Procurement
Ordering D-8075-170
SANIKB manufactures D-8075 in one size, so the quotation carries a single tub line.
- SKU
- D-8075-170
- Standard Lead Time
- 30-45 days after sample approval
Production is scheduled at 30-45 days after sample approval. Name the port of discharge and any carton marking in the enquiry so the cartons are marked and routed to suit.
Include these details with the RFQ
- Quantity of D-8075-170
- Floor-standing filler or wall spout
- Waste fitting finish
- Destination market and port
- Carton marking or private label
- Requested shipping month
Production dates are counted from sample approval, not from the order date.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request