Tapered Freestanding Bathtub with Angled Side, 59 & 67 in
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB D-8366 is a single-ended acrylic freestanding bathtub built on a tapered plan: one long side is angled, so the drain end is about 100 mm narrower than the backrest end. The walls rise almost straight to a thin, level rim, and the overflow and drain are grouped at the narrow end.
D-8366-150 measures 1500 x 800 x 600 mm (59 x 31.5 x 23.6 in) and D-8366-170 measures 1700 x 800 x 600 mm (67 x 31.5 x 23.6 in). The shell is matte white. Its rim has no tap holes, so it takes a floor-standing or wall-mounted filler. See more in the freestanding bathtub collection.
More in Freestanding Bathtubs
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of D-8366
Every option below is a produced configuration with its own SKU. 2 sizes. Name the exact SKU on each purchase order line.
Order codes
| SKU | Size |
|---|---|
| D-8366-150 | 59" x 31" |
| D-8366-170 | 67" x 31" |
Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.
Compare · 2 sizes
Size & spec comparison
| 59" x 31"D-8366-150 | 67" x 31"D-8366-170 | |
|---|---|---|
| Overall L×W×D | 59″ × 31.5″ × 23.6″ 1500 × 800 × 600 mm | 67″ × 31.5″ × 23.6″ 1700 × 800 × 600 mm |
Common specs above apply to every size; the table compares only what changes by size. Custom sizes available for OEM/ODM.
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Shape & Backrest
Tapered plan with an angled long side
D-8366 narrows from the backrest end to the drain end because one long side is set at an angle. The drawing shows a wide round end at the backrest and a rounded end cap at the drain end, with no flat side.
Sloped wall at the wide end
The backrest is the sloped wall at the wider, rounded end. The opposite end is narrower and holds the drain and overflow, so the bather faces the drain end.
Near-vertical sides, thin level rim
Apart from the backrest, the walls rise close to vertical and finish in a thin rim that stays level all round. The drawing gives the rim lip as 15 mm (0.6 in).
Other single-ended freestanding shapes are in the freestanding range.
Fit & Footprint
800 mm at the wide end, about 100 mm less at the drain
D-8366-150 is 59 x 31.5 x 23.6 inches (1500 x 800 x 600 mm) and D-8366-170 is 67 x 31.5 x 23.6 inches (1700 x 800 x 600 mm). The 800 mm width is taken at the backrest end.
- D-8366-150
- 59" x 31.5" x 23.6" (1500 x 800 x 600 mm)
- D-8366-170
- 67" x 31.5" x 23.6" (1700 x 800 x 600 mm)
- Interior (as drawn)
- 24.4" (620 mm) wide; 17.3" and 18.5" (440 and 470 mm) deep
- Faucet Mounting
- Floor-standing or wall-mounted filler; no tap holes
The drawing splits the 800 mm width into a 620 mm interior with 90 mm of rim and wall on each side, and gives inner depth at 440 mm and 470 mm. The drain sits at the narrow end, so place the floor waste there when setting out the room.
Confirm the drain position and outlet size for D-8366 on the approved drawing before the floor waste is set.
Construction & Finish
Matte white acrylic
D-8366 is made from pure acrylic sheet with a matte white surface.
White
Low-sheen surface
D-8366 is made in matte white rather than gloss. Approve the surface on a sample if the project pairs it with glossy fixtures.
The base of D-8366 sits flat on the floor. Check that the floor under the tub is level and finished before it is placed.
Record the approved D-8366 sample as the finish reference.
Compliance
D-8366 compliance documents
Quote D-8366-150 or D-8366-170 on each document request.
Compliance documents for D-8366-150 and D-8366-170 are matched to your destination market. A submittal should carry the current document references and their validity, which SANIKB supplies on request.
Name the destination market and any further documents in the inquiry; the written reply comes within 12 business hours.
Procurement
Ordering D-8366
D-8366 is quoted per size, and lead time is 30-45 days after sample approval.
- Size SKUs
- D-8366-150, D-8366-170
- Standard Lead Time
- 30-45 days after sample approval
Every outer surface of a freestanding tub stays on view after installation, so agree carton and corner protection for D-8366 in the quotation.
Include these details with the RFQ
- D-8366-150 and D-8366-170 quantities
- Destination market and port
- Floor-standing or wall-mounted filler, if required
- Carton marking and private label
- Requested shipping window for D-8366
D-8366 lead time is confirmed on the quotation.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request