Straight-Wall Stadium Freestanding Bathtub, 59 & 67 in
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB D-8022 is a double-ended stadium freestanding bathtub with near-vertical walls, a thin rim and a flat base, made in white acrylic. It comes in two sizes that differ in both length and width: D-8022-150 at 1500 x 750 x 600 mm (59 x 29.5 x 23.6 in) and D-8022-170 at 1700 x 800 x 600 mm (67 x 31.5 x 23.6 in).
The drain is centered on both sizes. The rim has no tap holes, so the filler is floor-standing or wall-mounted. D-8022 sits in the freestanding bathtub collection.
More in Freestanding Bathtubs
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of D-8022
Every option below is a produced configuration with its own SKU. 2 sizes. Name the exact SKU on each purchase order line.
Order codes
| SKU | Size |
|---|---|
| D-8022-150 | 59" x 30" |
| D-8022-170 | 67" x 31" |
Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.
Compare · 2 sizes
Size & spec comparison
| 59" x 30"D-8022-150 | 67" x 31"D-8022-170 | |
|---|---|---|
| Overall L×W×D | 59″ × 29.5″ × 23.6″ 1500 × 750 × 600 mm | 67″ × 31.5″ × 23.6″ 1700 × 800 × 600 mm |
Common specs above apply to every size; the table compares only what changes by size. Custom sizes available for OEM/ODM.
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Shape
Straight-sided freestanding tub with almost vertical walls
D-8022 has near-straight long sides and rounded ends. The drawing shows the long sides slightly convex in plan, and the walls rise almost vertically from a flat base.
Near-vertical walls
Because the walls barely lean, the outline at the floor is close to the outline at the rim, so the floor plan and the tub edge nearly coincide when setting out.
Thin rim, matching ends
A thin rim follows the stadium outline. Both ends are rounded to the same profile, which makes the tub double-ended with the drain at the center.
Other upright and stadium shapes are grouped in the freestanding tub range.
Two Footprints
1500 x 750 mm or 1700 x 800 mm
D-8022 changes width as well as length between its sizes: the 1500 mm SKU is 750 mm (29.5 in) wide and the 1700 mm SKU is 800 mm (31.5 in) wide. Both are 600 mm (23.6 in) high.
- D-8022-150
- 1500 x 750 x 600 mm (59 x 29.5 x 23.6 in)
- D-8022-170
- 1700 x 800 x 600 mm (67 x 31.5 x 23.6 in)
- Drain
- Centered; 750 or 850 mm from the end
- Faucet Mount
- Floor-standing or wall-mounted filler
On the 1500 mm size the drain is 750 mm (29.5 in) from the end and 375 mm (14.8 in) from the side; on the 1700 mm size it is 850 mm (33.5 in) and 400 mm (15.7 in). Inner depths are drawn at 460 mm (18.1 in) and 470 mm (18.5 in).
Check the width of the SKU ordered as well as the length; the two sizes do not share a footprint.
Material & Finish
White acrylic in a plain upright profile
D-8022 is made in white from pure acrylic sheet. The surface finish is agreed on the approval sample.
White
A plain profile shows the finish
With upright walls and a thin rim, D-8022 carries little molded detail, so surface quality is judged mainly on the long sides. Check them on the sample.
Agree packing for the thin rim and the rounded ends, and set out how damage found on delivery is recorded and reported.
Keep the approved sample on file for repeat orders of either size.
Compliance
Compliance documents matched to each D-8022 footprint
Check that the drawing in the submittal shows the 750 mm or 800 mm width that matches the D-8022 SKU being installed.
Because the two D-8022 SKUs differ in width, ask for the compliance documents and approved drawing against each SKU you plan to submit.
Inquiries that state the destination market receive the document list with the quotation, issued within 12 business hours.
Procurement
Ordering D-8022 in two footprints
SANIKB supplies D-8022 as two SKUs, D-8022-150 and D-8022-170, each quoted separately.
- Standard Lead Time
- 30-45 days after sample approval
- Quote Reply
- Written quote within 12 business hours
If a project has both smaller and standard bathrooms, the two footprints can be combined on one inquiry. Lead time starts once the sample is approved, so request it early in the schedule.
Include these details with the RFQ
- Split of the order between D-8022-150 and D-8022-170
- Destination market and discharge port
- Floor-standing or wall-mounted filler
- Scope of drain and overflow fittings
- Label and carton marking
- Requested ship date
The quotation, not this page, sets the final lead time.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request