Steeply Tapered Oval Freestanding Tub, Small Footprint, 59 & 67 in
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB FT049/FT050 is an elongated oval freestanding bathtub in gloss white acrylic whose walls taper steeply from a wide rim outline down to a small footprint on the floor. It is double ended and made in two sizes: FT049 at 1500 × 800 × 580 mm (59 × 31.5 × 22.8 in) and FT050 at 1700 × 800 × 580 mm (67 × 31.5 × 22.8 in). The rim is slim and has no tap holes, so the tub takes a floor-standing or wall-mounted filler.
Straight-sided outlines are in the SANIKB freestanding bathtub range.
More in Freestanding Bathtubs
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of FT049/FT050
Every option below is a produced configuration with its own SKU. 2 sizes. Name the exact SKU on each purchase order line.
Order codes
| SKU | Size |
|---|---|
| FT049 | 59" x 31" |
| FT050 | 67" x 31" |
Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.
Compare · 2 sizes
Size & spec comparison
| 59" x 31"FT049 | 67" x 31"FT050 | |
|---|---|---|
| Overall L×W×D | 59″ × 31.5″ × 22.8″ 1500 × 800 × 580 mm | 67″ × 31.5″ × 22.8″ 1700 × 800 × 580 mm |
Common specs above apply to every size; the table compares only what changes by size. Custom sizes available for OEM/ODM.
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Shape & Taper
Steep taper from a wide rim to a small base
FT049/FT050 is an elongated oval whose walls slope in steeply from the rim to the floor. The result is a wide outline at the top and a small footprint underneath.
Steeply tapered sides
The walls slope inward at a steep angle, leaving a base noticeably smaller than the rim outline in both lengths.
Slim rim, backrest at each end
A slim rim edges the elongated oval, and both ends are shaped as backrests. The finish is gloss white.
Measure clearances from the rim outline rather than the base, then compare with other outlines in the freestanding bathtub range.
Fit & Sizes
1500 or 1700 mm long, 580 mm high
FT049/FT050 is made at 1500 and 1700 mm in length, each 800 mm (31.5 in) wide and 580 mm (22.8 in) high. It stands flat on the floor.
- FT049
- 59" × 31.5" × 22.8" (1500 × 800 × 580 mm)
- FT050
- 67" × 31.5" × 22.8" (1700 × 800 × 580 mm)
- Installation
- Freestanding, flat to the floor
- Faucet Mount
- Floor-standing or wall-mounted
The small footprint leaves more open floor around the tub, but the rim still projects to the full 800 mm width, so a floor-standing faucet must reach over that rim. Mark the faucet position and the drain together on the plan.
Read the base outline and drain position from the approved drawing for each length.
Construction & Finish
Pure acrylic, gloss white finish
The FT049/FT050 body is pure acrylic sheet with a gloss white surface from the slim rim down to the narrow base.
White
Approve the gloss on the sample
Gloss white is the finish for both lengths of FT049/FT050. Approve it on the sample before the order goes into production.
A steep taper means the rim overhangs the base on every side, so cartons need support under the rim edge as well as at the base.
Check the rim edge on arrival, as it is the outermost point in the carton.
Compliance
Compliance documents for FT049/FT050
Ask for documents by SKU, FT049 or FT050, so each certificate file matches the length ordered.
Compliance documents for FT049/FT050 are matched to your destination market. Request the document references and their validity for the submittal, and give the destination market in the same message.
Replies, including document sets, go out within 12 business hours.
Procurement
Ordering FT049/FT050
FT049/FT050 is made in two lengths, each with its own SKU and its own line on the quotation.
- Lengths
- 1500 / 1700 mm
- Standard Lead Time
- 30-45 days after sample approval
Tell us whether the filler will be floor-standing or wall-mounted so its position can be checked against the rim overhang on the drawing. Lead time is counted from sample approval, and private label marking is arranged through the SANIKB OEM and ODM program.
Include these details with the RFQ
- Quantity per length: FT049 and FT050
- Filler type: floor-standing or wall-mounted
- Destination market and port of entry
- Certificate documents for FT049/FT050
- Brand marking on cartons
- Preferred shipping month
Take the lead time as a guide until the quotation fixes it.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request