Deep Single Bowl Undermount Kitchen Sink, 10-Inch SUS304 32×18

Brushed stainless over SUS304 sheet at 18 gauge (1.2 mm) is what SR3218 shows the room, and one undivided bowl is what it offers the cook. As a single bowl stainless steel kitchen sink, it trades a second bay for a full 10 inches of depth.

The body measures 32" × 18" × 10" (813 × 457 × 254 mm) and is handmade, with sound-dampening pads and undercoating. Tight radius corners read almost square, which keeps the usable basin large and the wipe-down simple.

Specifiers who write 10 inch undermount kitchen sink into a schedule usually mean capacity. SR3218 meets that with a 32" bay and no divider across it.

A single bay means one waste to rough in. For a repeated unit type, the plumber and the inspector have one connection to check, not two.

Because nothing divides the bowl, the full 32" length is one open basin.

Model

SR3218

Overall size

32" x 18" x 10" (813 x 457 x 254 mm)

Bowl layout

Single bowl

Depth

10" (254 mm)

Material

SUS304 stainless steel, 18 gauge (1.2 mm)

Finish

Brushed stainless

Mount

Undermount

MOQ

50 pcs

Eighteen inches is the body from front to back. Template the countertop from the drawing, not from the nominal cabinet size, and agree the undermount reveal with the fabricator in writing.

The cabinet gives up the full 10" bowl depth before the trap even starts. Whatever lives under the sink loses that height, so plan any drawer, filter or garbage disposal against it early. Bowl depth sets how much cabinet height is left.

For a 10 inch undermount kitchen sink, plan waste routing on the drawing and not on site. Put the trap run, the garbage disposal and the cabinet floor on one sheet and let the plumber approve it before joinery is ordered.

Depth also decides which accessories fit. A bottom grid protects a deep base, but check it against the 18" front-to-back body first.

Check the exterior dimensions against the cabinet. Doors, hinges and carcass sides take width from a 32" opening, so measure the clear interior width of the cabinet rather than the label on the box. Send that measurement with the RFQ and we will confirm the fit against the drawing.

The drain opening sits to the rear of the bowl, which frees cabinet space under the sink. A cutout template and mounting clips are included for undermount installation, so the fabricator and the installer start from the same reference and the same set of parts on every unit. Confirm both on the drawing.

Browse the full stainless steel kitchen sink range to compare codes side by side.

Paperwork follows the model code, never a product range. Name the destination market at inquiry stage so marking and documentation are quoted against it, and ask for the drawing and spec sheet with the quotation.

MOQ

50 pcs

Lead time

30-45 days after sample approval

Fifty pieces per code starts an order, and SR3218 can sit beside other codes from the undermount kitchen sink range on one RFQ. Write the model code and the brushed stainless finish on every PO line so a reorder reads the same way, whether it lands next month or next season, and list quantities per code so the container is loaded as planned.

Private-label cartons, logo printing, packaging artwork and custom sizes sit inside the SANIKB OEM and ODM program. Our factory in Foshan replies to a quotation request within 12 business hours.