Square Countertop Basin with Bowed Sides
Four gently bowed sides give D68 a square outline with a softened edge rather than a circular rim. This square countertop basin with bowed sides keeps the same 420 mm outside span in both plan directions. Below the upper edge, the white ceramic shell curves inward to a narrower flat lower boundary, as shown in the side elevation. The open washing cavity remains smooth around one central floor opening. There is no integrated ceramic tap platform in the photographed rim. D68 is listed for above-counter mounting at 420 × 420 × 135 mm overall. The lower contour and the equal upper spans describe different levels of the same body; 135 mm is its full exterior height.
Shape & size
Shape and size of D68
A square outline with gently curved sides
Each side bows between the short corner transitions
The original top plan draws four distinct side regions with slight outward curves. The short transitions at the corners preserve a square arrangement instead of a continuous circle.
A narrower lower boundary beneath the open rim
The side walls curve inward toward the bottom
The lower body rounds inward from the wider upper edge. A flat lower line is visible in the factory elevation, without a separately dimensioned base span.
One smooth bowl and one central floor position
The open rim remains free of a ceramic tap platform
The bowl follows the bowed perimeter without a rear deck interrupting it. A single floor opening lies centrally, and no overflow is shown in the original source.
420 × 420 × 135 mm overall
Use both 420 mm spans for the complete upper body
The catalogue gives equal outside plan spans and above-counter mounting for the white ceramic body. The 135 mm elevation measurement is complete exterior height rather than separately measured usable bowl depth.
D68
420 × 420 × 135 mm
D68 bowed-square rim above an inward-curving lower shell
- D68 — 420 × 420 × 135 mm
- Required quantity