23-Inch Low-Profile Rectangular Ceramic Semi-Recessed Vanity Basin
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SN501 is a low-profile rectangular vanity basin in glossy white vitreous china, 590 × 470 × 165 mm. One faucet hole sits center-back on the rim, and there is no overflow.
We make it in our Foshan factory. MOQ is 20 pcs and mixed 1×20 ft containers are accepted. A chrome pop-up is available with the basin.
More in Vanity Basins and Basin Tops
20 ft / 40 ft containersBelow 1 container: your own China forwarder required. · Mix models and categories. No retail.
Shape & size
Shape and size of SN501
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
- Dimensions and Low Profile Design of This Rectangular Ceramic Countertop Basin
- White Rectangular Ceramic Sink Build and Finish
- Drain and Faucet Setup for a Single Hole Ceramic Vanity Basin
- OEM and ODM Support from a Factory-Direct Ceramic Basin Supplier
Dimensions and Low Profile Design of This Rectangular Ceramic Countertop Basin
This rectangular ceramic countertop basin has a fixed footprint, so fabricators and installers can plan the vanity top and cutout around set numbers: 590 mm wide, 470 mm front to back, and 165 mm tall. The straight rectangular form gives clean sightlines that suit contemporary and transitional bathroom programs. Because the bowl is shallow rather than a tall vessel, faucet reach and clearance stay practical on a standard counter, and the profile limits splash. One faucet hole is pre-drilled in the center-back of the rim for single-hole faucets.
White Rectangular Ceramic Sink Build and Finish
Made of ceramic in a white finish, the SN501 fits high-traffic and high-turnover settings, where the fired, glazed surface resists staining and is simple for maintenance crews to clean. A consistent white tone matters for multifamily and hospitality buyers who need units to match across a floor or a phased rollout, and finish and batch consistency for volume orders are confirmed at quotation. As a white rectangular ceramic sink, it suits both single vanities and repeated installs across many units.
Drain and Faucet Setup for a Single Hole Ceramic Vanity Basin
As a single hole ceramic vanity basin, the SN501 has one faucet hole drilled in the center-back of the rim for single-hole faucets. There is no overflow on this model. That means the correct waste fitting is a non-overflow, free-flow pop-up, not the overflow pop-up used on basins with an overflow slot. Listing the free-flow drain on the spec sheet and purchase order at the design stage avoids a return or a site delay later. A chrome pop-up is available with the basin, and drain finish or faucet pairing can be set per program for OEM and private-label orders.
OEM and ODM Support from a Factory-Direct Ceramic Basin Supplier
SANIKB is a factory-direct ceramic basin supplier and runs OEM, ODM, and private-label programs on the SN501. Buyers building their own bathroom lines can brand the packaging, use neutral cartons, and receive documentation prepared for their product listings. Customization scope, tooling, and exclusivity terms are set per program. Importers and private-label brands can start with a trial quantity to qualify the SKU, then scale to repeat production without switching factories.
LOW PROFILE
Semi recessed ceramic sink with a shallow bowl
Next to our tall round and oval vessel sink models, SN501 has a shallow bowl, and faucet reach and clearance stay practical on a standard counter.
Next to our rectangular model with an integrated deck, SN501 puts one faucet hole in the center-back of the rim and keeps the body simpler.
As a cabinet basin in the 60 cm size class, it belongs with vanity programs rather than stand-alone art basins. Among semi recessed sinks, it fits a bathroom design that repeats one 590 mm basin across many vanities.
SIZES
Footprint and drilling of SN501
- Model
- SN501
- Overall size
- 23.2" × 18.5" × 6.5" (590 × 470 × 165 mm)
- Width
- 590 mm
- Front to back
- 470 mm
- Height
- 165 mm
- Faucet hole
- one, center-back of the rim
- Overflow
- none
- Material
- Vitreous china ceramic
- Finish
- Glossy White
- Mounting
- Above-counter
Fabricators can plan the vanity top and cutout around these fixed figures, the same for every semi recessed sink in a run.
OPTIONS
Drain, faucet and program options
Free-flow pop-up
For semi recessed bathroom sinks, specify the waste fitting at design stage, so purchase orders carry the right drain from the start.
Single-hole faucets
The hole fits single-hole faucets and single-lever mixers. Different drilling can be arranged through an ODM program.
Neutral or branded cartons
Packaging, drain finish and faucet pairing are set per program for OEM and private-label orders of bathroom sinks.
QUOTE
Send these details for SN501
Quote checklist
- Target volume and destination
- Drain finish and faucet pairing
- Branded or neutral packaging
- Spec sheet and drawing needs
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request