Slim-Rim Oval Slipper Freestanding Tub, 66 in
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB FT043 is a slipper-style oval freestanding tub in gloss white acrylic with a thin rim that curves up to one raised end. It is 750 mm wide and 1685 mm long, and its flat base sits directly on the floor. The single size is FT043, 1685 × 750 × 580 mm (66 × 29.5 × 22.8 in). With no tap holes in the rim, FT043 takes a floor-standing or wall-mounted filler. SANIKB turns quote requests around within 12 business hours.
Browse more single-ended designs in the slipper tub collection.
More in Slipper Tubs
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of FT043
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Profile & Rim
Thin rim curving up to one end
FT043 is oval in plan. Its thin rim curves upward toward a single raised end, which is the backrest.
A thin top edge
The rim is kept thin, so the rise to the raised end shows as one continuous line from the side.
750 mm wide, 1685 mm long
FT043 is 750 mm (29.5 in) across and 1685 mm (66 in) long overall. Plan room clearances from those two figures.
Other oval and capsule tubs sit in the freestanding bathtub range.
Size & Mounting
1685 × 750 × 580 mm, flat base
FT043 is the only size: 66 by 29.5 by 22.8 inches (1685 by 750 by 580 mm).
- FT043
- 66" × 29.5" × 22.8" (1685 × 750 × 580 mm)
- Faucet Mount
- Floor or wall
- Base
- Flat to floor
The rim has no tap holes. A floor-standing filler needs its supply brought up through the floor next to the tub; place it toward the low end so the spout is clear of the backrest.
The drain position is set on the approved FT043 drawing; request it before the floor is finished.
Material & Finish
Thin-rimmed shell in gloss white
FT043 is made from pure acrylic sheet, in gloss white only.
White
Sheen up to a thin edge
The approved sample sets the tone and sheen for every FT043 in the order, including along the thin rim.
The thin rim and the raised end take the first contact if a carton is dropped. Ask how both are supported in the packing.
Inspect the thin rim on arrival if any carton shows damage.
Compliance
Compliance documents for FT043
All FT043 paperwork refers to FT043.
Compliance documents for FT043 are matched to your destination market. Request the document reference and validity against FT043 before it is submitted for approval.
Put the destination market in the enquiry; a written response follows within 12 business hours.
Procurement
Ordering FT043
FT043 is manufactured in one size with a standard lead time of 30-45 days after sample approval.
- SKU
- FT043
- Standard Lead Time
- 30-45 days after sample approval
Where a project mixes FT043 with other tubs, list each model and quantity in the same enquiry so they can be planned into one shipment.
Include these details with the RFQ
- Quantity of FT043
- Filler: floor-standing or wall spout
- Waste fitting
- Destination market and port
- Carton marking
- Requested delivery month
Mixed-model enquiries should give a quantity per model.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request