Two-tone single hole bathroom faucet, brushed nickel top, matte black bottom sleeve, black-tipped spout — SANIKB B743 01 63 2Two-tone single hole bathroom faucet, brushed nickel top, matte black bottom sleeve, black-tipped spout, tall vessel height — SANIKB B743 02 63 2
01 / 02

Sleeved Single Hole Bathroom Faucet with Tall Vessel Option B743 01/02

SKU B743 01 63 2
Finish
Height
Certification
Certification mark
Min. order
20 ft / 40 ft containersBelow 1 container: your own China forwarder required.
Lead time
30–45 days
Reply time
1 business day
Material Stainless Steel
Type Single-hole bathroom faucet
Mount Deck-mounted, single hole

Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.

B743 01/02 is a single hole bathroom faucet built around a slim cylindrical body, brushed nickel on the upper section and a matte black sleeve below. A thin flat pin lever sits on the top cap, and the round tube spout leaves the body at mid-height before bending down to a black tip.

B743 01/02 is offered in a standard height and a tall vessel height, and the tall vessel height is used with vessel and above-counter basins. Buyers scanning the full range of bathroom faucets for wholesale and projects can compare it against other configurations before shortlisting a black sleeve two-tone bathroom faucet for a project.

More in Black Sleeve Faucet Collection

20 ft / 40 ft containersBelow 1 container: your own China forwarder required. · Mix models and categories. No retail.

View all 5

    Model sheet

    2 factory configurations of B743 01/02

    Every option below is a produced configuration with its own SKU. 1 finish × 2 heights. Name the exact SKU on each purchase order line.

    • Brushed Nickel & Matte Black / Standard NO. B743 01 63 2 Brushed Nickel & Matte BlackStandard
    • Brushed Nickel & Matte Black / Tall Vessel NO. B743 02 63 2 Brushed Nickel & Matte BlackTall Vessel

    Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.

    Matched set · one design

    Black Sleeve

    Black Sleeve wraps brushed nickel round bodies in a matte black sleeve, finished with thin levers and bent tube spouts.

    05Pieces
    one set
    1. Basin01–03
    2. Shower04–05

    Send a spec. Get a real quote in 1 business day.

    Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.

    We send quotes within 1 business day after receiving the necessary product, quantity and destination details.

    One itemised quote — not five
    Feasibility & certification checked per market
    Have a spec file? Attach it to your inquiry below.
    — Project brief B2B only
    Enquiry about Sleeved Single Hole Bathroom Faucet with Tall Vessel Option B743 01/02 SKU B743 01 63 2
    Please enter your first name.
    Please enter your company name.
    Please enter a valid email.
    Please enter your phone number.

    Wholesale · 20 ft / 40 ft · Mix available

    Drag & drop or browse PDF / IMG / XLS · 4MB ×3
      Engineer reply within 1 business day

      12 editions of the International Builders' Show (IBS).

      — Most recent
      Feb 2026 KBIS · Orlando, USA
      Mar 2026 Expo Revestir · São Paulo, Brazil
      6 international shows annually
      2026 Expo Revestir

      2026Expo Revestir

      São Paulo, Brazil
      2026 KBIS

      2026KBIS

      Orlando, Florida
      2025 KBIS

      2025KBIS

      Las Vegas, USA
      2025 The Big 5

      2025The Big 5

      Dubai, UAE
      2024 IBS

      2024IBS

      Las Vegas, Nevada, USA
      2024 Expo Guadalajara

      2024Expo Guadalajara

      Guadalajara, Mexico
      2023 Canton Fair

      2023Canton Fair

      Guangzhou, China
      2019 Cersaie

      2019Cersaie

      Bologna, Italy
      2019 ISH

      2019ISH

      Frankfurt, Germany
      2017 The Big 5

      2017The Big 5

      Dubai, UAE
      2014 KBIS

      2014KBIS

      Las Vegas — US debut
      2013 BAU

      2013BAU

      Munich, Germany

      Factory documentation

      Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.

      IAPMO cUPC certificate
      ISO 9001 quality management certificate
      WRAS approved product certificate
      IAPMO certificate of listing
      UDEM CE technical inspection certificate

      Design

      A sleeved column built for the Black Sleeve line

      B743 01/02 carries a two-tone sleeve design through a slim cylindrical single hole body.

      01 / FORM

      Cylindrical body, two-tone sleeve

      The upper body is brushed nickel and the lower sleeve is matte black. The body keeps a slim cylindrical form.

      02 / DETAIL

      Top cap lever and downturned spout

      A thin flat pin lever sits on the top cap. The round tube spout leaves the body at mid-height and bends down to a black tip.

      See the full single hole bathroom faucet range for other SANIKB models.

      Fit & Clearance

      Confirm the deck opening before ordering

      B743 01/02 is a single hole faucet, so the mounting deck needs one prepared opening sized to this model.

      Type
      Single Hole Faucet
      Mount
      Deck mounted, single hole
      Finish
      Brushed Nickel & Matte Black
      Heights
      Standard, Tall Vessel
      Material
      Stainless Steel

      B743 01/02 does not carry a published mounting hole diameter or deck thickness on this page, so confirm against the model spec sheet before a fabricator cuts the basin.

      State the height, standard or tall vessel, on the purchase order, since B743 01/02 is offered in both heights.

      Construction & Finish

      Stainless steel in a brushed nickel and matte black finish

      B743 01/02 is offered in stainless steel and finished in brushed nickel and matte black, the only finish stated for this faucet.

      Two-tone single hole bathroom faucet, brushed nickel top, matte black bottom sleeve, black-tipped spout — SANIKB B743 01 63 2

      Brushed Nickel & Matte Black

      One faucet, two tones

      Brushed nickel covers the upper body while matte black wraps the lower sleeve. No other finish is stated for this model.

      B743 01/02 lists one finish, brushed nickel and matte black; request a sample showing both tones before a single hole order is confirmed.

      Approve both tones on the sample, the brushed nickel upper body and the matte black sleeve and spout tip, before sign-off.

      Compliance

      cUPC listing for B743 01/02

      Name the market, then the paperwork

      Country, port and the document set your customs broker asks for. That is enough to start the conversation.

      B743 01/02 is cUPC listed. The published specification also holds material, type, mount, finish and MOQ. Before it goes into a submittal, request the current listing number and certificate validity so the documentation matches your destination market.

      Tell us the destination market and the route your importer follows. We confirm in writing which documents can travel with the goods before production is scheduled.

      Procurement

      Placing an order for B743 01/02

      B743 01/02 belongs to the Black Sleeve series alongside widespread, wall mount and thermostatic shower models.

      Published MOQ
      100 pcs
      Quote response
      Within 12 business hours

      Both the standard and tall vessel heights of B743 01/02 can sit on one purchase order next to the widespread, wall mount and thermostatic shower models in the Black Sleeve series.

      Buyers building a private label line around the Black Sleeve series can raise branding requirements through the SANIKB OEM and ODM programme.

      Include these details with the RFQ

      • Target order quantity
      • Height needed: standard or tall vessel
      • Destination country and port
      • Packaging and labeling preference
      • Requested lead time

      Send these points together with the RFQ.

      How we work

      From enquiry to shipment

      A factory-direct process built for importers, distributors and project buyers. No trading layer in between.

      1. 01

        Send the enquiry

        Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.

        Replied within 1 business day
      2. 02

        Our sales team contacts you

        A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.

        Email or WhatsApp
      3. 03

        Quotation

        You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.

        FOB or CIF
      4. 04

        Sample approval

        We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.

        Before mass production
      5. 05

        Production and shipment

        Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.

        30–45 days after approval
      50+ New models developed every year, tracking current North American and European trends
      1 business day Maximum first response to an enquiry
      Since 2000 Foshan factory, B2B trade only

      OEM and ODM to your specification

      We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.

      • Your logo on product, carton and documentation
      • Private-label packaging and manuals
      • Custom finish matched to your standard
      • Custom dimensions and tooling where volume supports it
      • Product development from your reference or price target
      • Destination-market documentation prepared on request

      FAQs

      Which variant codes cover the B743 01/02 two tone bathroom faucet?

      B743 01 63 2 is the standard-height version of our two tone bathroom faucet, and B743 02 63 2 is the tall vessel version. Both carry the same Brushed Nickel & Matte Black finish, so height is the only choice a buyer makes between the two codes. Writing the full variant code on each RFQ line lets our sales desk price every basin position correctly and keeps your receiving paperwork aligned with the cartons.

      Where does the brushed nickel end and the matte black begin on B743 01/02?

      B743 01/02 shows brushed nickel on the upper part of its slim cylindrical body and a matte black sleeve wrapped around the lower part. A round tube spout leaves the body at mid-height, bends downward and finishes in a black tip, so the dark tone appears twice. A thin flat pin lever sits on the top cap. Approve both tones on a pre-production finish check before bulk production is released.

      What is B743 01/02 made from?

      Stainless steel is the body material we use for B743 01/02. Distributors who keep separate stainless and brass assortments can file this sleeved faucet with their stainless lines. Mention the material on your purchase order alongside the finish and height, and our team will reflect all three in the written quotation, so the material, the two-tone finish and the height are confirmed together.

      Is the tall vessel height of B743 01/02 meant for vessel sinks?

      Yes, the tall vessel height of B743 01/02, code B743 02 63 2, is used with vessel and above-counter basins. The standard height, code B743 01 63 2, shares the same Brushed Nickel & Matte Black finish. Both mount on the deck through one hole. Projects that mix basin styles can list both heights on a single order, with the quantity per height stated separately on each RFQ line.

      What MOQ applies, and does B743 01/02 carry a cUPC listing?

      B743 01/02 has an MOQ of 100 pcs and is cUPC listed. Our sales desk sends written quotes within 12 business hours of a complete request, and lead time is quoted with each order. Name the destination market in that first message so we can state which listing documents accompany the shipment, and ask for the current certificate details if the faucet goes into a submittal.