Matched set · one design
Slate Wedge
Slate Wedge combines faceted Gun Metal Grey bodies, flat blade spouts and angular levers on square and rectangular plates.
Slate Wedge Gun Metal Grey Body Jet Concealed Shower System SP1015A 23
Finish
Certification
cUPC listed
Min. order
100 pcs
Lead time
30–45 days
Reply time
12 business hours
Material
Brass
Type
Concealed shower system
Mount
Wall-mounted, in-wall valve
SP1015A 23 is a concealed shower system finished in Gun Metal Grey. A square rain head projects on a wall arm above a rectangular valve plate with an angular lever, joined by three square body jets, three small square volume knobs, a slide bar handheld and a round wall outlet.
Contractors specifying a full gun metal grey body jet shower system for one project line can pair SP1015A 23 with more of our shower faucet wholesale selection.
More in Slate Wedge Faucet Collection
Mix any models in one 20ft container · no per-model minimum
-
B1015 01/02Wedge Single Hole Bathroom Faucet with Tall Vessel Option B1015 01/02Deck-mounted, single hole
-
B815 04Gun Metal Grey Slate Wedge Widespread Bathroom Faucet B815 04Deck-mounted, three holes
-
B1015 01 27Slate Wedge Gun Metal Grey Wall Mount Bathroom Faucet B1015 01 27Wall-mounted
-
B1015 01 28Square-Plate Wedge Gun Metal Grey Wall Mount Bathroom Faucet B1015 01 28Wall-mounted
-
SP1015 22Slate Wedge Gun Metal Grey Diverter Shower Valve Trim Kit SP1015 22Wall-mounted trim, in-wall valve
Send a spec. Get a real quote in 12 business hours.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
One itemised quote — not five
Feasibility & certification checked per market
Have a spec file? Email it with your reference number
12 consecutive years at KBIS and IBS.
— Most recent
Feb 2026
KBIS· Orlando, USA
Mar 2026
Expo Revestir· São Paulo, Brazil
Standard on every shipment.
System Layout
Rain Head, Body Jets and Handheld in One System
SP1015A 23 groups a wall-arm rain head, three body jets and a slide bar handheld under one Gun Metal Grey finish.
01 / OVERHEAD
Square Rain Head on a Wall Arm
A square Gun Metal Grey rain head projects from a wall arm above the valve plate. No secondary shower head or ceiling arm appears in this configuration.
02 / BODY JETS
Three Body Jets With Volume Knobs
Three square body jets sit on the wall alongside three small square volume knobs. A slide bar handheld and round wall outlet complete the assembly.
Compare SP1015A 23 with other options in the concealed shower faucets collection.
Fit & Clearance
Wall Layout for SP1015A 23
SP1015A 23 sets several fixtures into the wall: the rain head arm, the valve plate, three body jets and the handheld outlet.
- Type
- Concealed Shower Faucet
- Mount
- Wall, Concealed Valve
- Finish
- Gun Metal Grey
- Material
- Brass
- Outlets
- Rain Head + 3 Body Jets + Handheld
Wall-arm reach and body jet spacing are not part of the published data here. Request written confirmation from the factory on the exact positions your project wall requires.
SP1015A 23 sets the rain head, valve plate, body jets and handheld outlet at separate wall points, so verify each position against the official technical drawing before the wall is framed.
Order the rain head, valve plate, body jets and handheld outlet together under one SP1015A 23 line item.
Construction & Finish
Brass Shower System in Gun Metal Grey
SP1015A 23 is brass, with the rain head, valve plate, body jets and handheld outlet all finished in Gun Metal Grey.
Gun Metal Grey
One Finish Across Every Fixture
Gun Metal Grey carries across the rain head arm, the valve plate, the body jets and the handheld outlet. A physical sample of the trim can be requested ahead of an order to check the finish in hand.
Material is confirmed as brass across the system; if your project specification calls for a different alloy, request written confirmation from the factory before ordering.
Finish swatches for the full system are available on request before a bid is placed.
Compliance
cUPC listing for SP1015A 23
Name the market, then the paperwork
Country, port and the document set your customs broker asks for. That is enough to start the conversation.
SP1015A 23 is cUPC listed. The published specification also holds material, type, mount, finish and MOQ. Before it goes into a submittal, request the current listing number and certificate validity so the documentation matches your destination market.
Tell us the destination market and the route your importer follows. We confirm in writing which documents can travel with the goods before production is scheduled.
Procurement
Sourcing SP1015A 23 as a Full Shower Package
SP1015A 23 is available to wholesale buyers and project accounts sourcing a complete concealed shower line.
- Published MOQ
- 100 pcs
- Quote response
- Within 12 business hours
SP1015A 23 can be included on the same purchase order as the diverter trim kit, for projects that need both a full system and a standalone trim.
Private-label programs are available through the SANIKB OEM and ODM programme page, covering how branding and packaging are set before an order is placed.
Include these details with the RFQ
- Confirmation that every fixture is needed per unit
- Total quantity of complete SP1015A 23 systems
- Destination country and receiving port
- Target dispatch timeline
- Any private-label marking across the system pieces
Send these points together so the quote reflects the full system rather than a single trim.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
50+
New models developed every year, tracking current North American and European trends
12 business hours
Maximum first response to an enquiry
Since 2000
Foshan factory, B2B trade only
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request