Matte Black — Matte black rectangular column bathroom faucet with wide flat plate spout on top and thin rod pin lever — SANIKB DL-01 631-BKChrome — Matte black rectangular column bathroom faucet with wide flat plate spout on top and thin rod pin lever — SANIKB DL-01 631-CPMatte black rectangular column bathroom faucet with wide flat plate spout on top and thin rod pin lever — SANIKB DL-01 631-LSJGun Metal Grey — Matte black rectangular column bathroom faucet with wide flat plate spout on top and thin rod pin lever — SANIKB DL-01 631-QHMatte Black — Matte black rectangular column bathroom faucet with wide flat plate spout on top and thin rod pin lever, tall vessel height — SANIKB DL-01 632-BKChrome — Matte black rectangular column bathroom faucet with wide flat plate spout on top and thin rod pin lever, tall vessel height — SANIKB DL-01 632-CPMatte black rectangular column bathroom faucet with wide flat plate spout on top and thin rod pin lever, tall vessel height — SANIKB DL-01 632-LSJGun Metal Grey — Matte black rectangular column bathroom faucet with wide flat plate spout on top and thin rod pin lever, tall vessel height — SANIKB DL-01 632-QH
01 / 08

Slate Top Single Hole Bathroom Faucet with Tall Vessel Option DL-01 631/632

SKU DL-01 631-BK
Finish
Height
Min. order
20 ft / 40 ft containersBelow 1 container: your own China forwarder required.
Lead time
30–45 days
Reply time
1 business day
Material Brass
Type Single-hole bathroom faucet
Mount Deck-mounted, single hole

Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.

DL-01 631/632 sets a wide, flat rectangular plate across the top of a rectangular column on a square base, forming the spout itself. A thin rod pin lever pivots on the top rear of the plate, and DL-01 631/632 is offered at standard and tall vessel heights.

A plate-form spout reads differently than a column or diagonal arm, so it is worth comparing the flat plate spout pin lever faucet against those shapes inside the bathroom faucets for wholesale and projects range.

More in Single Hole Bathroom Faucet

20 ft / 40 ft containersBelow 1 container: your own China forwarder required. · Mix models and categories. No retail.

View all 129

    Model sheet

    8 factory configurations of DL-01 631/632

    Every option below is a produced configuration with its own SKU. 4 finishes × 2 heights. Name the exact SKU on each purchase order line.

    • Matte Black / Standard NO. DL-01 631-BK Matte BlackStandard
    • Chrome / Standard NO. DL-01 631-CP ChromeStandard
    • Brushed Gold / Standard NO. DL-01 631-LSJ Brushed GoldStandard
    • Gun Metal Grey / Standard NO. DL-01 631-QH Gun Metal GreyStandard
    • Matte Black / Tall Vessel NO. DL-01 632-BK Matte BlackTall Vessel
    • Chrome / Tall Vessel NO. DL-01 632-CP ChromeTall Vessel
    • Brushed Gold / Tall Vessel NO. DL-01 632-LSJ Brushed GoldTall Vessel
    • Gun Metal Grey / Tall Vessel NO. DL-01 632-QH Gun Metal GreyTall Vessel

    Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.

    Send a spec. Get a real quote in 1 business day.

    Send the model, selected dimensions, quantity and destination. Confirm specifications, packing and documentation in your quotation.

    We send quotes within 1 business day after receiving the necessary product, quantity and destination details.

    One itemised quote — not five
    Feasibility & certification checked per market
    Have a spec file? Attach it to your inquiry below.
    — Project brief B2B only
    Enquiry about Slate Top Single Hole Bathroom Faucet with Tall Vessel Option DL-01 631/632 SKU DL-01 631-BK
    Please enter your first name.
    Please enter your company name.
    Please enter a valid email.
    Please enter your phone number.

    Wholesale · 20 ft / 40 ft · Mix available

    Drag & drop or browse PDF / IMG / XLS · 4MB ×3
      Engineer reply within 1 business day

      12 editions of the International Builders' Show (IBS).

      — Most recent
      Feb 2026 KBIS · Orlando, USA
      Mar 2026 Expo Revestir · São Paulo, Brazil
      6 international shows annually
      2026 Expo Revestir

      2026Expo Revestir

      São Paulo, Brazil
      2026 KBIS

      2026KBIS

      Orlando, Florida
      2025 KBIS

      2025KBIS

      Las Vegas, USA
      2025 The Big 5

      2025The Big 5

      Dubai, UAE
      2024 IBS

      2024IBS

      Las Vegas, Nevada, USA
      2024 Expo Guadalajara

      2024Expo Guadalajara

      Guadalajara, Mexico
      2023 Canton Fair

      2023Canton Fair

      Guangzhou, China
      2019 Cersaie

      2019Cersaie

      Bologna, Italy
      2019 ISH

      2019ISH

      Frankfurt, Germany
      2017 The Big 5

      2017The Big 5

      Dubai, UAE
      2014 KBIS

      2014KBIS

      Las Vegas — US debut
      2013 BAU

      2013BAU

      Munich, Germany

      Design

      Rectangular Column, Flat Plate Spout

      DL-01 631/632 forms its spout as a wide, flat plate rather than a rounded or tapered outlet.

      01 / FORM

      Rectangular Column and Plate

      A rectangular column rises from a square base and opens into a wide, flat rectangular plate that forms the spout itself. The plate sits at the top of the column rather than extending off to one side.

      02 / CONTROL

      Rear Pin Lever

      A thin rod pin lever pivots at the top rear of the plate, set behind rather than beside the spout run. The plate spout forms the top of the faucet in front of it.

      The square base and rectangular column keep the whole fixture aligned to straight, flat-edged proportions.

      Fit & Clearance

      Deck Prep for DL-01 631/632

      DL-01 631/632 mounts through one prepared deck or vessel opening.

      Type
      Single Hole Faucet
      Finish
      Brushed Gold, Chrome, Gun Metal Grey, Matte Black
      Heights
      Standard, Tall Vessel
      Material
      Brass

      Confirm against the model spec sheet before cutting a deck or vessel opening.

      Choose the tall vessel height for a raised vessel bowl and the standard height for a conventional undermount or drop-in basin.

      Construction & Finish

      Brass Construction, Four Finish Options

      DL-01 631/632 is built in brass and offered across four finish options on the same plate-spout body.

      Finish · 4

      One body, four finishes

      Brushed Gold, Chrome, Gun Metal Grey and Matte Black are the four finishes offered on the same rectangular brass construction. Choosing between them changes the surface color, while the plate and lever geometry stay the same.

      • Matte Black Matte Black
      • Chrome Chrome
      • Brushed Gold Brushed Gold
      • Gun Metal Grey Gun Metal Grey

      Request a physical finish sample ahead of a large order so the Brushed Gold or Gun Metal Grey tone can be checked against other fittings in the project.

      Sample approval before production keeps the finish consistent with anything already specified for the room.

      Documents

      Documents for DL-01 631/632

      Name the market, then the paperwork

      Country, port and the document set your customs broker asks for. That is enough to start the conversation.

      Tell us the destination market for DL-01 631/632 and the route your importer follows. We confirm in writing which documents can travel with the goods before production is scheduled.

      Send the requirements your inspector or customs broker uses. The document set is agreed per order, so nothing is assumed from another model.

      Procurement

      Ordering DL-01 631/632

      DL-01 631/632 is quoted through SANIKB's wholesale and project channel.

      Published MOQ
      100 pcs
      Quote response
      Within 12 business hours

      One purchase order can carry several finishes of DL-01 631/632, so a project needing both Chrome and Brushed Gold can combine them on a single PO.

      Private label and custom packaging run through the SANIKB OEM and ODM programme, for buyers who need DL-01 631/632 under their own brand.

      Include these details with the RFQ

      • Finish selection: Brushed Gold, Chrome, Gun Metal Grey or Matte Black
      • Height selection: standard or tall vessel
      • Order quantity and target ship date
      • Destination market and any required documentation
      • Private label or standard packaging preference

      Send these five points together in one RFQ message.

      How we work

      From enquiry to shipment

      A factory-direct process built for importers, distributors and project buyers. No trading layer in between.

      1. 01

        Send the enquiry

        Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.

        Replied within 1 business day
      2. 02

        Our sales team contacts you

        A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.

        Email or WhatsApp
      3. 03

        Quotation

        You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.

        FOB or CIF
      4. 04

        Sample approval

        We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.

        Before mass production
      5. 05

        Production and shipment

        Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.

        30–45 days after approval
      50+ New models developed every year, tracking current North American and European trends
      1 business day Maximum first response to an enquiry
      Since 2000 Foshan factory, B2B trade only

      OEM and ODM to your specification

      We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.

      • Your logo on product, carton and documentation
      • Private-label packaging and manuals
      • Custom finish matched to your standard
      • Custom dimensions and tooling where volume supports it
      • Product development from your reference or price target
      • Destination-market documentation prepared on request

      FAQs

      Is DL-01 631/632 a brass single hole bathroom faucet?

      Yes, DL-01 631/632 is a brass single hole bathroom faucet, deck-mounted through one opening in the counter or basin. Its slate top is a wide, flat rectangular plate that crowns a rectangular column on a square base, and that plate is the spout. A thin rod pin lever pivots on the top rear of that same plate.

      Where does the pin lever sit on the slate top?

      On DL-01 631/632 the pin lever is a thin rod that pivots at the top rear of the slate plate, set behind rather than beside the spout run. The plate itself forms the spout, so lever and spout share one flat top above the rectangular column and square base. Buyers comparing this plate-top shape with column or diagonal arm spouts can browse the bathroom faucet collection.

      Which SKU codes cover the eight finish and height combinations?

      DL-01 631 codes are the Standard height and DL-01 632 codes are the Tall Vessel height. Suffix BK marks Matte Black, CP marks Chrome, LSJ marks Brushed Gold and QH marks Gun Metal Grey. So DL-01 632-LSJ is Brushed Gold on the tall vessel body, and DL-01 631-QH is Gun Metal Grey at standard height. Quote each full code with its own quantity.

      When should a buyer pick DL-01 632 over DL-01 631?

      Pick DL-01 632, the Tall Vessel version, for positions where a raised vessel bowl sits on top of the counter. DL-01 631, the Standard version, suits a basin set into or under the counter. Both share the slate plate, rectangular column, square base and rear pin lever, so the same silhouette carries across both heights. State the height code for each position on the RFQ.

      What MOQ and reply time apply to DL-01 631/632?

      DL-01 631/632 carries an MOQ of 100 pcs, and we reply to RFQs in writing within 12 business hours. Lead time is quoted per model at inquiry. Distributors who want their own brand on the box can arrange private label packaging through the OEM and ODM service, quoted alongside the standard brass faucet order.