Matte Black — Matte black single hole bathroom faucet with long slanted arm, flat outlet head and thin angled pin lever — SANIKB DL-01 626-BKChrome — Matte black single hole bathroom faucet with long slanted arm, flat outlet head and thin angled pin lever — SANIKB DL-01 626-CPMatte black single hole bathroom faucet with long slanted arm, flat outlet head and thin angled pin lever — SANIKB DL-01 626-LSJGun Metal Grey — Matte black single hole bathroom faucet with long slanted arm, flat outlet head and thin angled pin lever — SANIKB DL-01 626-QHMatte Black — Matte black single hole bathroom faucet with long slanted arm, flat outlet head and thin angled pin lever, tall vessel height — SANIKB DL-01 627-BKChrome — Matte black single hole bathroom faucet with long slanted arm, flat outlet head and thin angled pin lever, tall vessel height — SANIKB DL-01 627-CPMatte black single hole bathroom faucet with long slanted arm, flat outlet head and thin angled pin lever, tall vessel height — SANIKB DL-01 627-LSJGun Metal Grey — Matte black single hole bathroom faucet with long slanted arm, flat outlet head and thin angled pin lever, tall vessel height — SANIKB DL-01 627-QH
01 / 08

Slant Pin Single Hole Bathroom Faucet with Tall Vessel Option DL-01 626/627

SKU DL-01 626-BK
Finish
Height
Min. order
20 ft / 40 ft containersBelow 1 container: your own China forwarder required.
Lead time
30–45 days
Reply time
1 business day
Material Brass
Type Single-hole bathroom faucet
Mount Deck-mounted, single hole

Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.

DL-01 626/627 rises from a low oval, stadium-shaped base into a long straight diagonal arm that reaches a flat, wide outlet head, offered at standard and tall vessel heights. A thin pin lever runs parallel to the arm at an angle, set beside it rather than on top.

Specifiers weighing a diagonal spout run can set the slanted arm pin lever bathroom faucet against upright column styles inside the bathroom faucets for wholesale and projects catalog.

More in Single Hole Bathroom Faucet

20 ft / 40 ft containersBelow 1 container: your own China forwarder required. · Mix models and categories. No retail.

View all 129

    Model sheet

    8 factory configurations of DL-01 626/627

    Every option below is a produced configuration with its own SKU. 4 finishes × 2 heights. Name the exact SKU on each purchase order line.

    • Matte Black / Standard NO. DL-01 626-BK Matte BlackStandard
    • Chrome / Standard NO. DL-01 626-CP ChromeStandard
    • Brushed Gold / Standard NO. DL-01 626-LSJ Brushed GoldStandard
    • Gun Metal Grey / Standard NO. DL-01 626-QH Gun Metal GreyStandard
    • Matte Black / Tall Vessel NO. DL-01 627-BK Matte BlackTall Vessel
    • Chrome / Tall Vessel NO. DL-01 627-CP ChromeTall Vessel
    • Brushed Gold / Tall Vessel NO. DL-01 627-LSJ Brushed GoldTall Vessel
    • Gun Metal Grey / Tall Vessel NO. DL-01 627-QH Gun Metal GreyTall Vessel

    Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.

    Send a spec. Get a real quote in 1 business day.

    Send the model, selected dimensions, quantity and destination. Confirm specifications, packing and documentation in your quotation.

    We send quotes within 1 business day after receiving the necessary product, quantity and destination details.

    One itemised quote — not five
    Feasibility & certification checked per market
    Have a spec file? Attach it to your inquiry below.
    — Project brief B2B only
    Enquiry about Slant Pin Single Hole Bathroom Faucet with Tall Vessel Option DL-01 626/627 SKU DL-01 626-BK
    Please enter your first name.
    Please enter your company name.
    Please enter a valid email.
    Please enter your phone number.

    Wholesale · 20 ft / 40 ft · Mix available

    Drag & drop or browse PDF / IMG / XLS · 4MB ×3
      Engineer reply within 1 business day

      12 editions of the International Builders' Show (IBS).

      — Most recent
      Feb 2026 KBIS · Orlando, USA
      Mar 2026 Expo Revestir · São Paulo, Brazil
      6 international shows annually
      2026 Expo Revestir

      2026Expo Revestir

      São Paulo, Brazil
      2026 KBIS

      2026KBIS

      Orlando, Florida
      2025 KBIS

      2025KBIS

      Las Vegas, USA
      2025 The Big 5

      2025The Big 5

      Dubai, UAE
      2024 IBS

      2024IBS

      Las Vegas, Nevada, USA
      2024 Expo Guadalajara

      2024Expo Guadalajara

      Guadalajara, Mexico
      2023 Canton Fair

      2023Canton Fair

      Guangzhou, China
      2019 Cersaie

      2019Cersaie

      Bologna, Italy
      2019 ISH

      2019ISH

      Frankfurt, Germany
      2017 The Big 5

      2017The Big 5

      Dubai, UAE
      2014 KBIS

      2014KBIS

      Las Vegas — US debut
      2013 BAU

      2013BAU

      Munich, Germany

      Design

      Diagonal Arm on a Low Oval Base

      DL-01 626/627 replaces a vertical column with a diagonal arm running from a low, stadium-shaped base.

      01 / FORM

      Low Oval Base and Diagonal Arm

      A low oval, stadium-shaped base carries a long straight arm that rises at a diagonal to a flat, wide outlet head. The arm runs in one straight line from base to outlet head.

      02 / CONTROL

      Thin Pin Lever

      A thin pin lever runs parallel to the diagonal arm, angled the same way and set beside it rather than mounted on top. Its slim rod shape reads differently from the blade and loop levers used on other single hole models.

      The wide, flat outlet head sits at the top of the arm, where the diagonal run of the fixture ends.

      Fit & Clearance

      Deck Prep for DL-01 626/627

      DL-01 626/627 mounts through one prepared deck or vessel opening.

      Type
      Single Hole Faucet
      Finish
      Brushed Gold, Chrome, Gun Metal Grey, Matte Black
      Heights
      Standard, Tall Vessel
      Material
      Brass

      Confirm against the model spec sheet before cutting a deck or vessel opening.

      Choose the tall vessel height for a raised vessel bowl and the standard height for a conventional undermount or drop-in basin.

      Construction & Finish

      Brass Construction, Four Finish Options

      DL-01 626/627 is built in brass and offered across four finish options on the same diagonal-arm body.

      Finish · 4

      One body, four finishes

      Brushed Gold, Chrome, Gun Metal Grey and Matte Black are the four finishes offered on the same diagonal-arm brass construction. Choosing between them changes the surface color, while the arm and lever geometry stay the same.

      • Matte Black Matte Black
      • Chrome Chrome
      • Brushed Gold Brushed Gold
      • Gun Metal Grey Gun Metal Grey

      Request a physical finish sample ahead of a large order so the Brushed Gold or Gun Metal Grey tone can be checked against other fittings in the project.

      Sample approval before production keeps the finish consistent with anything already specified for the room.

      Documents

      Documents for DL-01 626/627

      Name the market, then the paperwork

      Country, port and the document set your customs broker asks for. That is enough to start the conversation.

      Tell us the destination market for DL-01 626/627 and the route your importer follows. We confirm in writing which documents can travel with the goods before production is scheduled.

      Send the requirements your inspector or customs broker uses. The document set is agreed per order, so nothing is assumed from another model.

      Procurement

      Ordering DL-01 626/627

      DL-01 626/627 is quoted through SANIKB's wholesale and project channel.

      Published MOQ
      100 pcs
      Quote response
      Within 12 business hours

      One purchase order can carry several finishes of DL-01 626/627, so a project needing both Gun Metal Grey and Matte Black can combine them on a single PO.

      Private label and custom packaging run through the SANIKB OEM and ODM programme, for buyers who need DL-01 626/627 under their own brand.

      Include these details with the RFQ

      • Finish selection: Brushed Gold, Chrome, Gun Metal Grey or Matte Black
      • Height selection: standard or tall vessel
      • Order quantity and target ship date
      • Destination market and any required documentation
      • Private label or standard packaging preference

      Send these five points together in one RFQ message.

      How we work

      From enquiry to shipment

      A factory-direct process built for importers, distributors and project buyers. No trading layer in between.

      1. 01

        Send the enquiry

        Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.

        Replied within 1 business day
      2. 02

        Our sales team contacts you

        A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.

        Email or WhatsApp
      3. 03

        Quotation

        You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.

        FOB or CIF
      4. 04

        Sample approval

        We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.

        Before mass production
      5. 05

        Production and shipment

        Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.

        30–45 days after approval
      50+ New models developed every year, tracking current North American and European trends
      1 business day Maximum first response to an enquiry
      Since 2000 Foshan factory, B2B trade only

      OEM and ODM to your specification

      We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.

      • Your logo on product, carton and documentation
      • Private-label packaging and manuals
      • Custom finish matched to your standard
      • Custom dimensions and tooling where volume supports it
      • Product development from your reference or price target
      • Destination-market documentation prepared on request

      FAQs

      Is DL-01 627 a single hole vessel sink faucet?

      Yes. DL-01 627 is the tall vessel version of our slant pin design, made as a single hole vessel sink faucet that mounts on the deck through one opening. Its partner code, DL-01 626, is the standard height version of the same design for a conventional undermount or drop-in basin. Both codes are listed with the low oval base, the flat wide outlet head and the thin pin lever angled beside the arm, so a mixed project keeps one look across raised bowls and recessed basins.

      How do the SKU suffixes BK, CP, LSJ and QH map to finishes?

      On DL-01 626/627, BK stands for Matte Black, CP for Chrome, LSJ for Brushed Gold and QH for Gun Metal Grey. The suffix follows the height code, so DL-01 627-LSJ is the Brushed Gold tall vessel unit and DL-01 626-QH is Gun Metal Grey at standard height. Quoting full codes such as these on a purchase order removes any doubt about which finish and height a warehouse should pick and pack.

      What material is the slant pin body made from?

      DL-01 626/627 is a brass faucet in every finish we offer. Matte Black, Chrome, Brushed Gold and Gun Metal Grey are the four finishes listed on that brass construction, and choosing between them changes the surface color while the slanted arm, the stadium-shaped base and the pin lever keep the same geometry. A physical finish sample can be requested ahead of a large order to check the tone against other fittings in the project.

      What is the minimum order for DL-01 626/627?

      Our MOQ for DL-01 626/627 is 100 pcs. One purchase order can carry several finishes, so a project needing both Gun Metal Grey and Matte Black can combine them on a single PO. Send the exact SKU codes, quantities per code, target ship date and destination market, and our sales team replies in writing within 12 business hours with a quote and lead time for that order.

      Can DL-01 626/627 be supplied under our own brand?

      Private label supply for DL-01 626/627 runs through our OEM and ODM service. Buyers name the finishes and heights they want branded, plus their packaging preference, and we confirm the program terms in writing before production. The single hole bathroom faucet collection groups our faucets built around one deck opening, including column-based and arm-based profiles, for buyers planning a wider private label range.