Home› Faucets› Bathroom Faucets› Single Hole Faucet› DL-01 071-BK

Matte Black — Matte black tall square slab body bathroom faucet with rounded corners, flat spout and wedge plate lever — SANIKB DL-01 071-BK

Matte black tall square slab body bathroom faucet with rounded corners, flat spout and wedge plate lever — SANIKB DL-01 071-CP

Gun Metal Grey — Matte black tall square slab body bathroom faucet with rounded corners, flat spout and wedge plate lever — SANIKB DL-01 071-QH

Matte Black — Matte black tall square slab body bathroom faucet with rounded corners, flat spout and wedge plate lever — SANIKB DL-01 072-BK

Matte black tall square slab body bathroom faucet with rounded corners, flat spout and wedge plate lever — SANIKB DL-01 072-CP

Gun Metal Grey — Matte black tall square slab body bathroom faucet with rounded corners, flat spout and wedge plate lever — SANIKB DL-01 072-QH

01 / 06

Slab Body Single Hole Bathroom Faucet with Tall Vessel Option DL-01 071/072

SKU DL-01 071-BK

Finish

Height

Min. order

100 pcs

Lead time

30–45 days

Reply time

12 business hours

Material Brass

Type Single-hole bathroom faucet

Mount Deck-mounted, single hole

DL-01 071/072 is a single hole bathroom faucet with a tall square-section body, rounded corners and a flat rectangular spout. A flat wedge-shaped plate lever angles up on top of this Slab Paddle model.

DL-01 071/072 is offered in a standard height and a tall vessel option, so one model number covers two heights under a single SKU. Buyers comparing the full range of bathroom faucets for wholesale and projects can shortlist this square slab tall vessel faucet against other single hole layouts before placing an order.

More in Single Hole Bathroom Faucet

Mix any models in one 20ft container · no per-model minimum

View all 129

Model sheet

6 factory configurations of DL-01 071/072

Every option below is a produced configuration with its own SKU. 3 finishes × 2 heights. Name the exact SKU on each purchase order line.

NO. DL-01 071-BK Matte BlackTall Vessel
NO. DL-01 071-CP ChromeTall Vessel
NO. DL-01 071-QH Gun Metal GreyTall Vessel
NO. DL-01 072-BK Matte BlackStandard
NO. DL-01 072-CP ChromeStandard
NO. DL-01 072-QH Gun Metal GreyStandard

Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.

Matched set · one design

Slab Paddle

Slab Paddle works in square-section bodies, squared spouts and a single plate or blade lever.

Basin

This piece Basin · 01 01DL-01 071/072 Basin faucetStandard · Tall

Kitchen

Kitchen · 02 02DL-05 051 Square kitchen faucetWith square riser

One quote

Get one quote for the complete setAll 2 pieces · 3 finishes · one enquiry covers the whole set

View the full Slab Paddle set →

FinishesMatte BlackChromeGun Metal Grey

Send a spec. Get a real quote in 12 business hours.

Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.

One itemised quote — not five

Feasibility & certification checked per market

Have a spec file? Email it with your reference number

— Project brief B2B only

Enquiry about Slab Body Single Hole Bathroom Faucet with Tall Vessel Option DL-01 071/072 SKU DL-01 071-BK

First name * Please enter your first name.

Company * Please enter your company name.

Email * Please enter a valid email.

WhatsApp (optional)

Comment *

Attachments (optional)

Drag & drop or browse PDF / IMG / XLS · 4MB ×3

Engineer reply within 12 business hours

12 consecutive years at KBIS and IBS.

— Most recent

Feb 2026 KBIS· Orlando, USA

Mar 2026 Expo Revestir· São Paulo, Brazil

16 years on the floor · 6 international shows annually

2026Expo Revestir

São Paulo, Brazil

2026KBIS

Orlando, Florida

2025KBIS

Las Vegas, USA

2025The Big 5

Dubai, UAE

2024IBS

Orlando, USA

2024Expo Guadalajara

Guadalajara, Mexico

2023Canton Fair

Guangzhou, China

2019Cersaie

Bologna, Italy

2018ISH

Frankfurt, Germany

2017The Big 5

Dubai, UAE

2014KBIS

Las Vegas — US debut

2012BAU

Munich, Germany

Standard on every shipment.

UDEM CE technical inspection certificate

Design

A tall slab body built for the Slab Paddle line

DL-01 071/072 pairs a tall square-section body with rounded corners in this single hole bathroom faucet.

01 / FORM

Square column, rounded corners

DL-01 071/072 uses a tall square-section body with rounded corners and a flat rectangular spout. The model is offered in standard and tall vessel heights.

02 / DETAIL

Wedge-shaped lever on top

A flat wedge-shaped plate lever angles up on top of DL-01 071/072. The handle is a single lever design.

See the full single hole bathroom faucet range for other single hole designs.

Fit & Clearance

Confirm the deck cutout before ordering DL-01 071/072

DL-01 071/072 is a single hole faucet, so the mounting surface needs one prepared opening sized to this model.

Type: Single Hole Faucet
Mount: Deck mounted, single hole
Finish: Chrome, Gun Metal Grey, Matte Black
Heights: Standard, Tall Vessel
Material: Brass

DL-01 071/072 does not carry a published mounting hole diameter or deck thickness in this data, so confirm against the model spec sheet before a fabricator cuts a basin or countertop.

State the height, standard or tall vessel, on the purchase order, since DL-01 071/072 is offered in both heights.

Confirm deck thickness with the factory before basin cutouts are finalized.

Construction & Finish

Brass finished in chrome, gun metal grey or matte black

DL-01 071/072 is built in brass and offered in chrome, gun metal grey or matte black, the three finishes stated for this faucet.

Finish · 3

Three stated finishes

Chrome, gun metal grey and matte black are all stated for DL-01 071/072, with no combination finish documented for this model. A purchase order should specify one of the three by name.

Matte Black
Chrome
Gun Metal Grey

Since DL-01 071/072 is offered in three separate finishes, request a swatch of the specific tone ordered before a run is confirmed.

Keep the signed-off DL-01 071/072 finish swatch on file for the order.

Documents

Documents for DL-01 071/072

Name the market, then the paperwork

Country, port and the document set your customs broker asks for. That is enough to start the conversation.

Tell us the destination market for DL-01 071/072 and the route your importer follows. We confirm in writing which documents can travel with the goods before production is scheduled.

Send the requirements your inspector or customs broker uses. The document set is agreed per order, so nothing is assumed from another model.

Procurement

Placing an order for DL-01 071/072

DL-01 071/072 can be quoted together with its Slab Paddle series sibling DL-05 051.

Published MOQ: 100 pcs
Quote response: Within 12 business hours

One purchase order can carry all three finishes of DL-01 071/072 together with its Slab Paddle kitchen sibling DL-05 051.

Buyers building a private label line around DL-01 071/072 can review packaging and branding options through the SANIKB OEM and ODM programme.

Include these details with the RFQ

Target order quantity
Height needed: standard or tall vessel
Destination country and port
Packaging and labeling preference
Requested lead time

Request DL-01 071/072 Quote View OEM & ODM Program

Send these points in one message with the RFQ.

How we work

From enquiry to shipment

A factory-direct process built for importers, distributors and project buyers. No trading layer in between.

01

Send the enquiry

Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
Replied within 12 business hours
02

Our sales team contacts you

A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
Email or WhatsApp
03

Quotation

You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
FOB or CIF
04

Sample approval

We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
Before mass production
05

Production and shipment

Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
30–45 days after approval

50+ New models developed every year, tracking current North American and European trends

12 business hours Maximum first response to an enquiry

Since 2000 Foshan factory, B2B trade only

OEM and ODM to your specification

We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.

Your logo on product, carton and documentation
Private-label packaging and manuals
Custom finish matched to your standard
Custom dimensions and tooling where volume supports it
Product development from your reference or price target
Destination-market documentation prepared on request

Get a quote View OEM & ODM program

FAQs

What finishes and heights are available for DL-01 071/072?

DL-01 071/072 is offered in chrome, gun metal grey and matte black, the three finishes stated for this faucet. A standard height and a tall vessel option are both offered under the same model. The tall vessel height is used with vessel or above-counter basins. State the finish and the height together on each purchase order line for DL-01 071/072.

What should I confirm before installing DL-01 071/072?

DL-01 071/072 is a single hole faucet, so the basin or countertop needs one prepared opening. Request written confirmation from the factory on the mounting dimensions before a fabricator cuts the opening, since this data does not carry that figure. Match the chosen height to the basin type as well, because the tall vessel option suits an above-counter vessel bowl.

How does DL-01 071/072 compare with DL-05 051?

DL-01 071/072 is a bathroom faucet with a single hole mount, while Slab Paddle Square Kitchen Faucet with Square Riser DL-05 051 is a kitchen faucet from the same Slab Paddle series. Route DL-01 071/072 to a bathroom basin with a single deck hole, and specify DL-05 051 for a kitchen sink position. Confirm the finish line-up for each SKU separately when a project specifies both pieces for one job.