Home›Faucets›Bathroom Faucets› Single Hole Faucet› B1026 01 10 5

Matte black six-facet single hole bathroom faucet with six-sided rose gold top cap and rose gold pin lever — SANIKB B1026 01 10 5

Matte black six-facet single hole bathroom faucet with six-sided rose gold top cap and rose gold pin lever, tall vessel height — SANIKB B1026 02 10 5

01 / 02

Six-Facet Single Hole Bathroom Faucet with Tall Vessel Option B1026 01/02

SKU B1026 01 10 5

Finish

Height

Certification

Min. order

20 ft / 40 ft containersBelow 1 container: your own China forwarder required.

Lead time

30–45 days

Reply time

1 business day

Material Zinc Alloy

Type Single-hole bathroom faucet

Mount Deck-mounted, single hole

Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.

B1026 01/02 is a single hole bathroom faucet built around a faceted matte black column and a flared faceted foot, finished in matte black and rose gold. A hexagonal rose-gold top cap carries a slim pin lever, and a curved tube spout ends in a downturned tip.

B1026 01/02 is offered in a standard height and a tall vessel height, and both can be specified on one order. Buyers scanning the full range of bathroom faucets for wholesale and projects can compare it against other configurations before shortlisting a six-facet black rose gold bathroom faucet for a project.

More in Six Facet Faucet Collection

20 ft / 40 ft containersBelow 1 container: your own China forwarder required. · Mix models and categories. No retail.

View all 5

Model sheet

2 factory configurations of B1026 01/02

Every option below is a produced configuration with its own SKU. 1 finish × 2 heights. Name the exact SKU on each purchase order line.

NO. B1026 01 10 5 Matte Black & Rose GoldStandard
NO. B1026 02 10 5 Matte Black & Rose GoldTall Vessel

Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.

Matched set · one design

Six Facet

The Six Facet series pairs faceted matte black bodies and six-sided trim plates with rose gold hubs and pin levers.

05Pieces
one set

Basin01–02
Shower03–04
Kitchen05

Basin

This piece Basin · 01 01B1026 01/02 Basin faucetStandard · Tall
Basin · 02 02B1026 27 Wall-mount basin faucet

Shower

Kitchen

Kitchen · 05 05K794D 01 Pull-down kitchen faucet

One quote

Get one quote for the complete setAll 5 pieces · Matte Black & Rose Gold · one enquiry covers the whole set

View the full Six Facet set →

FinishesMatte Black & Rose Gold

Send a spec. Get a real quote in 1 business day.

Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.

We send quotes within 1 business day after receiving the necessary product, quantity and destination details.

One itemised quote — not five

Feasibility & certification checked per market

Have a spec file? Attach it to your inquiry below.

— Project brief B2B only

Enquiry about Six-Facet Single Hole Bathroom Faucet with Tall Vessel Option B1026 01/02 SKU B1026 01 10 5

First name * Please enter your first name.

Company * Please enter your company name.

Email * Please enter a valid email.

Phone * Please enter your phone number.

WhatsApp (optional)

Wholesale · 20 ft / 40 ft · Mix available

Procurement plan

Comment *

Attachments (optional)

Drag & drop or browse PDF / IMG / XLS · 4MB ×3

Engineer reply within 1 business day

12 editions of the International Builders' Show (IBS).

— Most recent

Feb 2026 KBIS · Orlando, USA

Mar 2026 Expo Revestir · São Paulo, Brazil

6 international shows annually

2026Expo Revestir

São Paulo, Brazil

2026KBIS

Orlando, Florida

2025KBIS

Las Vegas, USA

2025The Big 5

Dubai, UAE

2024IBS

Las Vegas, Nevada, USA

2024Expo Guadalajara

Guadalajara, Mexico

2023Canton Fair

Guangzhou, China

2019Cersaie

Bologna, Italy

2019ISH

Frankfurt, Germany

2017The Big 5

Dubai, UAE

2014KBIS

Las Vegas — US debut

2013BAU

Munich, Germany

Factory documentation

Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.

UDEM CE technical inspection certificate

Design

A faceted column built for the Six Facet line

B1026 01/02 is a single hole faucet in the Six Facet series with a faceted column, a faceted foot and a hexagonal cap.

01 / FORM

Faceted column and foot

The faceted matte black column is paired with a flared, faceted foot. Flat faceted planes run along both the column and the foot rather than a round profile.

02 / DETAIL

Hexagonal cap and pin lever

A hexagonal rose-gold top cap holds a slim pin lever, giving the lever a distinct metallic accent against the matte black column. The curved tube spout ends in a downturned tip.

See the full single hole bathroom faucet range for other single hole designs.

Fit & Clearance

Confirm the deck opening before ordering

B1026 01/02 is a single hole faucet, so the mounting surface needs one prepared opening sized to this model.

Type: Single Hole Faucet
Mount: Single hole
Finish: Matte Black & Rose Gold
Heights: Standard, Tall Vessel
Material: Zinc Alloy

State the height, standard or tall vessel, on the purchase order, since the two heights are ordered as separate configurations under this SKU.

Construction & Finish

Zinc alloy with matte black and rose gold

B1026 01/02 is zinc alloy, finished in matte black and rose gold, and no other finish is offered for this faucet.

Matte Black & Rose Gold

One finish, two tones

The matte black tone is on the faceted column, while rose gold is on the top cap and pin lever. Matte black and rose gold is the single finish offered for B1026 01/02.

B1026 01/02's cap and lever carry the rose-gold accent, so request a swatch of both tones before a single hole run is confirmed.

Approve the swatch against B1026 01/02's hexagonal cap, not the column alone, before sign-off.

Compliance

cUPC listing for B1026 01/02

Name the market, then the paperwork

Country, port and the document set your customs broker asks for. That is enough to start the conversation.

B1026 01/02 is cUPC listed. The published specification also holds material, type, mount, finish and MOQ. Before it goes into a submittal, request the current listing number and certificate validity so the documentation matches your destination market.

Tell us the destination market and the route your importer follows. We confirm in writing which documents can travel with the goods before production is scheduled.

Procurement

Placing an order for B1026 01/02

B1026 01/02 groups naturally with the rest of the Six Facet catalogue on a single quote.

Published MOQ: 100 pcs
Quote response: Within 12 business hours

Both the standard and tall vessel heights of B1026 01/02 can sit on one purchase order next to the wall, kitchen and shower pieces in the Six Facet catalogue.

Buyers building a private label line around B1026 01/02 can review packaging and branding options through the SANIKB OEM and ODM programme.

Include these details with the RFQ

Target order quantity
Height needed: standard or tall vessel
Destination country and port
Packaging and labeling preference
Requested lead time

Request B1026 01/02 Quote View OEM & ODM Program

Group these five points into one message when requesting the quote.

How we work

From enquiry to shipment

A factory-direct process built for importers, distributors and project buyers. No trading layer in between.

01

Send the enquiry

Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
Replied within 1 business day
02

Our sales team contacts you

A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
Email or WhatsApp
03

Quotation

You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
FOB or CIF
04

Sample approval

We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
Before mass production
05

Production and shipment

Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
30–45 days after approval

50+ New models developed every year, tracking current North American and European trends

1 business day Maximum first response to an enquiry

Since 2000 Foshan factory, B2B trade only

OEM and ODM to your specification

We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.

Your logo on product, carton and documentation
Private-label packaging and manuals
Custom finish matched to your standard
Custom dimensions and tooling where volume supports it
Product development from your reference or price target
Destination-market documentation prepared on request

Get a quote View OEM & ODM program

FAQs

What finish and height options does B1026 01/02 offer?

B1026 01/02 is offered in matte black and rose gold, the only finish combination stated for this faucet. Buyers choose between a standard height and a tall vessel height at order time. The faceted column is matte black, while the hexagonal cap and pin lever are rose gold. Confirm which height each fixture position needs, and write that height on every line of the purchase order.

What should I confirm before installing B1026 01/02?

B1026 01/02 is a single hole faucet, so the basin or countertop needs one prepared opening for this model.

How does B1026 01/02 compare with B1026 27 for a project?

B1026 01/02 is a single hole faucet, while Six Facet Matte Black & Rose Gold Wall Mount Bathroom Faucet B1026 27 is a wall mount design from the same Six Facet series. Choose B1026 01/02 where the basin has a single deck hole, and route to B1026 27 where the faucet mounts on the wall and the counter has no faucet hole. Both share the matte black and rose gold finish, so a project can specify either mounting type without changing the finish line on a purchase order.