Single Bowl Fireclay Workstation Sink with Recessed-Groove Apron

It's a one-piece fireclay farmhouse sink with a single undivided bowl and an integrated ledge that holds workstation accessories. On the SN101W the apron is reversible: one face has recessed grooves (a fluted front), the other is smooth, and the installer chooses which face shows during fitting.

Size is the main difference. The SN101W2420 is 24 inches (610mm) wide; the SN101W3320 is 33 inches (838mm) wide. Both share a 20-inch front-to-back depth, a 10-inch bowl, fireclay body, center drain, and the same reversible recessed-groove/smooth apron. Pick 24 inches for compact runs, 33 inches for standard farmhouse cabinets.

The bowl has a ledge built into its side walls, so accessories sit below the rim and slide the full width. Because it's a single undivided bowl, no center divider breaks the ledge — unlike double-bowl workstations. Accessories such as a board, colander, and roll-up rack ride the ledge; a bottom grid protects the base.

Plan for a farmhouse base cabinet at least 3 inches wider than the sink — about 27 inches for the 24-inch model, 36 inches for the 33-inch — with an apron cutout and reinforced support, since fireclay is heavy. The sink has no pre-drilled faucet holes, so the faucet mounts on the deck or wall.

The SN101W ships B2B from our Foshan factory with a 50-piece minimum order and a 30–45 day lead time. It comes in white and matte black, in 24-inch and 33-inch sizes, and is cUPC certified for North America. Custom sizes and OEM private-label finishing are available at qualifying volumes.

A fireclay workstation apron sink has a heavy, kiln-fired glazed body with excellent heat and stain resistance, where stainless steel is lighter and prone to denting and water spotting. The SN101W adds two features many apron sinks lack: a reversible recessed-groove or smooth front, and an integrated ledge for workstation accessories.