Saddle-Rim Double Slipper Freestanding Tub, Gloss White, 67 in
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB D-8321 is a gloss white acrylic double slipper freestanding bathtub with both ends raised high and a rim that dips in a smooth arc through the middle. The ends flare outward above a narrower floor footprint. D-8321 is the one size: 1700 × 800 × 700 mm (67 × 31.5 × 27.6 in), with a centered drain. The rim has no tap holes, so the tub takes a floor-standing or wall-mounted filler.
For D-8321, a quotation for the 1700 mm size is sent within 12 business hours. Related raised-end models are in the slipper tub collection.
More in Slipper Tubs
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of D-8321
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Rim & Ends
High ends with a 130 mm dip at mid-length
The D-8321 rim reaches 700 mm (27.6 in) at the ends and drops by about 130 mm (5.1 in) toward the middle, where the drawing gives roughly 570 mm (22.4 in). From the side this reads as a saddle line.
Two raised backrests
Both ends rise to full height and flare outward, so the tub has a backrest at each end and no fixed head or foot.
22.2 in deep at the ends
Inner depth on the drawing is 565 mm (22.2 in) at the ends and 450 mm (17.7 in) at the center, where the rim is lower.
Other raised-end shapes appear in the soaking tub collection.
Fit & Drain
Drain at mid-plan, 850 mm from each end
D-8321 is 67 × 31.5 × 27.6 inches (1700 × 800 × 700 mm). The drain is placed 850 mm from the end and 400 mm from the side, the exact middle of the plan.
- D-8321
- 67" × 31.5" × 27.6" (1700 × 800 × 700 mm)
- Rim Height (as drawn)
- 27.6" at the ends, about 22.4" at mid-length (700 / 570 mm)
- Inner Depth (as drawn)
- 22.2" at the ends, 17.7" at center (565 / 450 mm)
- Faucet Mounting
- No tap holes; floor-standing or wall-mounted filler
Because the rim dips at mid-length, a floor-standing filler set beside the middle of the tub reaches over the lower part of the rim. The ends flare out past the footprint, so measure clearance to walls at rim level rather than at the floor.
Set the D-8321 floor waste at the drawn 850 / 400 mm position once the drawing is approved.
Construction & Finish
Acrylic in gloss white
D-8321 is made from pure acrylic sheet, in white with a gloss surface.
White
Bright, reflective finish
The gloss surface picks out the flared ends and the curve of the rim. D-8321 is made in this one finish.
The tub rests flat on the floor on its narrower base. Plan the flooring under it before installation, as the base stays visible below the flared ends.
A signed-off D-8321 sample becomes the finish reference for the order.
Compliance
D-8321 compliance documents
Request all D-8321 paperwork against D-8321.
Ask for the D-8321 compliance documents and their validity to include in the project submittal.
Let SANIKB know the market and the paperwork your client needs for D-8321, and a written reply follows within 12 business hours.
Procurement
D-8321 order details
D-8321 is a single-size model, built 30-45 days after sample approval.
- Size SKU
- D-8321
- Standard Lead Time
- 30-45 days after sample approval
The flared ends make D-8321 wider at the rim than at the base, so confirm packed dimensions with SANIKB when planning container space.
Include these details with the RFQ
- D-8321 quantity
- Destination market and port
- Floor-standing or wall filler
- Carton marking
- Target shipping window
The quotation states the D-8321 lead time.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request