Small-Radius Single Bowl Undermount Kitchen Sink 30×18

Fifty pieces is the entry quantity for S3018, a 30 inch single bowl in SUS304. It carries our Most Popular tag, and it is the under mount stainless steel sink to start a distributor range with.

S3018 measures 30 by 18 by 10 inches, or 762 by 457 by 254 mm. It is tagged for sink bases from 30 to 32 inches wide.

Overall Size

30" × 18" × 10" (762 × 457 × 254 mm)

Mounting

Undermount

Bowl

Single, small radius

Depth

10" (254 mm)

Material

SUS304 stainless steel, 18 gauge (1.2 mm)

Finish

Brushed stainless

Measure the clear inside width of the base unit and compare it with 30 inches, as you would for any of our kitchen sinks. Side panels and face frames reduce the space a sink can use.

Eighteen inches front to back leaves deck room behind the bowl for a faucet. Check the cabinet depth against the 10 inch bowl before the countertop is cut.

Ask the fabricator to confirm the cutout edge against the drawing, because the reveal is set on site and not by the sink.

Distributor and project orders often want one single bowl kitchen sink that every unit shares, and undermount kitchen sinks suit that brief. A single bowl removes the question of bowl split, so the specification stays short and the order list is easy to audit when cartons arrive.

Stone fabricators cut the countertop to the bowl opening, and the undermount rim leaves a clean counter edge. A single 30 inch template can repeat unit after unit.

Where a project needs a divided bowl, our double bowl undermount kitchen sinks uses the same steel and finish, so a mixed scheme looks consistent across kitchens.

Longer single bowls give more room across the bowl but need a wider cabinet. S3018 is the 30 inch option for base units at the smaller end of the range.

The 30 to 32 inch width tag shows the span of sink bases it is made for. Buyers with mixed cabinet widths can check which kitchens fall inside that span.

If a kitchen needs a different bowl count, ask for a double bowl code in the same finish rather than a different steel.

If the cabinet is not a standard 30 inch run, send its drawing with the quantity and we confirm the options before the quotation.

Name the model code, the SUS304 material and the 18 gauge thickness in one line. Add the brushed stainless finish and the undermount mounting so the schedule reads the same to the purchaser and the installer.

Attach the drawing to the line and quote the 10 inch depth on it. Installers use that figure to check the trap and disposer clearance before they plumb the sink.

Send the model code and quantity with the drawing request, and we return the drawing against the same line.

For a phased project, repeat the same code on every line. One model code, one material line and one drawing keep each delivery checkable against the first.

S3018 is cUPC listed. Volume changes the delivery schedule rather than the paperwork, so give us the destination market and total quantity with the first enquiry.

The spec sheet and the dimensioned drawing are issued against S3018 on request. Both give a cabinet maker and a stone fabricator what they need to start, and both can go into the submittal pack.

Branding, carton design and custom sizes follow our OEM and ODM programme. Our Foshan factory makes S3018 in-house and quotes within 12 business hours.

MOQ

50 pcs

Lead time

30–45 days after sample approval