Square Single Bowl Undermount Stainless Steel Bar Sink 17×17

SUS304 stainless steel at 18 gauge (1.2 mm), brushed, and formed by hand into one square bowl: that describes S1717 as a stainless steel basin sink. It is a bar prep size, built for counter space where a full kitchen sink will never fit.

The bowl has tight-radius corners, which keep the shape square and simple to wipe out. The brushed finish suits a bar or prep bowl that sees daily use.

A square plan has no long axis, so a cutting board, a bottle tray or a rinse basket sits the same way in either direction.

Our factory in Foshan makes S1717 as a standard model and offers OEM and ODM changes such as gauge, finish and drain offset, so a hospitality buyer can match several stations to one specification.

One outline, one depth, one steel. The row values below are the factory specification for this code.

Model

S1717

Overall size

17.0" × 17.0" × 9.0" (432 × 432 × 228 mm)

Mounting

Undermount

Bowl

Single, square

Depth

9.0" (228 mm)

Material

SUS304 stainless steel, 18 gauge (1.2 mm)

Finish

Brushed stainless

Construction

Handmade

The outer 17 × 17 dimensions do not define the countertop cutout. Release the stone order only after the cutout and reveal are taken from the model drawing.

Check the cabinet clear opening, the sink supports and the trap clearance below a 9 inch bowl. Place the faucet so its spout lands over the drain.

Before placing a repeat order, mark which stations take the bowl as a bar sink and which as prep sinks. The drawing then shows the waste position once, and every cabinet maker works from the same revision, whichever site receives the goods.

Hotels, clubs and multi-family projects rarely buy just one of these bar sinks. They repeat the same square bowl across lounges, minibars, pantries and island prep areas, and the value of S1717 is that every unit is identical. Whether the station is a bar or a prep area, the bowl is the same, so prep sinks and bar sinks can share one drawing.

Quote one code for every station and ask for one drawing. Cabinet makers can then cut every opening from the same template, and site teams do not mix up sizes during installation.

Where a few stations need a different footprint, add a custom square size to the same order. Gauge, finish and drain offset can also be changed as OEM requests. The steel and brushed finish stay consistent across the set, so the counters read as one family.

Minimum order

50 pcs

Lead time

30–45 days after sample approval

Certification: cUPC. Ask for the spec sheet with your RFQ, because the sheet is issued per model code, and the size and finish then read the same on every document.

Private-label cartons, gauge and finish changes are handled through our OEM and ODM service. Send the model code and quantity, and quotations come back within 12 business hours.