S-Curve Flared-End Freestanding Bathtub, Double Ended, 71 in
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB D-8026 is a 71 inch double ended freestanding bathtub in white acrylic, built in one size: D-8026 at 1800 x 800 x 580 mm (71 x 31.5 x 22.8 in). Its ends flare outward in an S-curve from a narrower rectangular base, a pagoda-like outline capped by a thin, level rim. Inside, both ends are sloped for reclining, and the drain is centered. The rim has no tap holes; the tub takes a floor-standing or wall-mounted filler.
Written quotes for D-8026 are issued within 12 business hours. Compare it with the freestanding bathtub range.
More in Freestanding Bathtubs
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of D-8026
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Silhouette
S-curved ends flaring from a narrow base
Seen from the side, each end of D-8026 rises from a narrower rectangular base and flares outward in an S-curve to meet a thin, level rim. The plan is a square-cornered rectangle, symmetric end to end.
Pagoda-like flare at each end
The S-curve runs the same way at both ends, so the silhouette reads identically from either side of the room. The base is narrower than the rim outline.
Sloped backrests facing each other
Both inner ends are sloped and the drain is in the middle, so two identical backrest positions face each other across the basin.
Longer rectangular and oval tubs are grouped in the freestanding collection.
Fit & Plumbing
1800 x 800 mm footprint, 580 mm high
D-8026 is one size only: 1800 mm (71 in) long, 800 mm (31.5 in) wide and 580 mm (22.8 in) high. The drawn inner depth is 450 to 460 mm (17.7 to 18.1 in).
- D-8026
- 71" × 31.5" × 22.8" (1800 × 800 × 580 mm)
- Drain Position
- Center: 900 mm from the end, 400 mm from the side
- Faucet Mounting
- Floor-standing or wall-mounted
- Base
- Rectangular, flat to floor
At 1800 mm, D-8026 needs a room long enough to leave walking space past both flared ends, because the rim projects beyond the base. The waste goes in at the exact center of the footprint.
Check that the 1800 mm tub clears the door opening and stair turns on the delivery route.
Construction & Finish
White acrylic, flat base on the floor
The shell is pure acrylic sheet in white. D-8026 has no feet; its rectangular base rests flat on the floor.
White
One tone for a long silhouette
The whole D-8026 shell, inside and out, is made in white.
Gloss or matte for D-8026 is confirmed on the approval sample, and that sample then stays as the reference for the order.
Keep one approved sample at the receiving warehouse for side-by-side checks.
Compliance
Compliance documents for D-8026
With one size only, the D-8026 document set needs no SKU cross-reference.
D-8026 ships as a single SKU, D-8026, so the document reference and the order line match one to one.
Give the destination market in the first email and the paperwork is prepared to suit. Written replies go out within 12 business hours.
Procurement
Ordering D-8026
D-8026 is quoted as one line for the 1800 mm size, with a lead time of 30-45 days after sample approval.
- Standard Lead Time
- 30-45 days after sample approval
- Quote Reply
- within 12 business hours
Check the S-curve on the approved sample from both ends, since the flare is the feature buyers see first.
Include these details with the RFQ
- Quantity of D-8026
- Faucet: floor-standing or wall
- Sample quantity for approval
- Destination market and port
- Carton and pallet marking
- Required shipping month
Treat the lead time as starting on sample sign-off.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request