Rounded Triangular Basin with Offset Drain
A broad end and two bowed sides give D117 a triangular outline that narrows into a rounded tip. This rounded triangular basin with offset drain keeps the floor opening in the wider region of one smooth washing cavity. The upper edge runs continuously around that changing width without a ceramic tap platform. Beneath it, the lower shell curves inward toward a narrower flat boundary in the factory elevation. D117 is white ceramic for above-counter installation at 650 × 450 × 120 mm overall. Those figures describe its complete exterior, including the rounded end transitions; the 120 mm measurement is outside body height rather than usable cavity depth.
Shape & size
Shape and size of D117
A changing width within the triangular outline
Two bowed sides narrow toward a rounded tip
The top plan connects a broad short end to a narrower rounded end through curved side edges. The perimeter has no sharp pointed vertex, and the catalogue does not specify a corner installation.
The floor opening follows the broader bowl region
The drain is offset across the complete length
One circular floor opening is shown toward the wide part of the cavity. Its distance from the ends is not separately dimensioned, so the 650 mm overall length does not locate a plumbing centre.
A smooth open bowl above an inward-curving shell
The rim continues without an integrated tap platform
A plain edge surrounds the single cavity, with no overflow shown. The side elevation curves the lower wall inward to a flat lower boundary without publishing a separate base width.
650 × 450 × 120 mm overall
Specify the complete rounded-triangle D117 body
The white ceramic body is listed for above-counter mounting. Its complete plan spans include the changing width and rounded tip, while 120 mm gives exterior height.
D117
650 × 450 × 120 mm
D117 broad-end triangular bowl with an offset floor opening
- D117 — 650 × 450 × 120 mm
- Required quantity