Rounded Rectangular Basin with a Thin Open Rim
D552’s thin upper rim runs continuously around broad corner arcs and straighter side middles. The rounded rectangular basin with a thin open rim leaves the washing cavity open around its whole perimeter. Long and short sides remain distinct in the top plan, while the elevation shows a plain substantially upright outside wall. Small lower transitions meet the bottom without a separate ceramic support. Inside, one smooth cavity contains a central floor opening. The original source shows no integrated tap deck or separate overflow. D552 is white ceramic for above-counter mounting at 500 × 370 × 135 mm overall. The full exterior includes both corner curves and rim; the 135 mm height does not establish usable inner depth.
Shape & size
Shape and size of D552
A narrow plain edge around the whole cavity
The rim remains open across every side
The factory photograph shows a continuous thin rim with no integrated tap deck interrupting it. The cavity is one smooth bowl rather than separately divided areas.
Long and short sides connected by broad corner arcs
The middle side regions retain the rectangular arrangement
The top drawing preserves unequal outside spans with distinguishable straighter middles. Broad corner curves connect those regions without creating a circular outer footprint.
An undecorated outside profile and central floor position
The smooth wall stands substantially upright
The elevation draws principal upright outside faces with short rounded lower transitions. A central floor opening lies in the plain interior, and no separate overflow is shown.
500 × 370 × 135 mm overall
Use D552’s full outside plan and exterior height
The catalogue lists white ceramic for above-counter installation. The printed dimensions include the rim and rounded corners, without independent internal-floor or usable-depth measurements.
D552
500 × 370 × 135 mm
D552 thin open rim around broad rectangular corner arcs
- D552 — 500 × 370 × 135 mm
- Required quantity