Rounded-Corner Rectangular Freestanding Tub, Wide Flat Deck, 67 in
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB FT025 is a single-ended acrylic freestanding bathtub with a rectangular body, rounded vertical corners and a wide flat deck around the basin. A sloped backrest fills one end and the drain sits at the foot end, with a slot overflow in the basin. It is made in one size, FT025, at 1700 × 800 × 610 mm (67 × 31.5 × 24.0 in). It rests flat on the floor, and the deck has no tap holes, so it takes a floor-standing or wall-mounted filler.
Quotes for FT025 are answered within 12 business hours. Compare it with oval and square models in the SANIKB freestanding bathtub collection.
More in Freestanding Bathtubs
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of FT025
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Layout & Deck
Sloped backrest at one end, drain at the other
FT025 is single-ended: the bather reclines against a sloped backrest and faces the drain at the foot end. A wide flat deck frames the basin.
A wide flat top
The top of FT025 is a wide flat deck rather than a thin lip, leaving room to rest a hand on the edge when getting in or out.
Drain at the foot end
The drain sits at the foot end, opposite the backrest, so a filler placed at that end runs water in away from the bather's back.
Rectangles with a backrest at each end are also in the freestanding bathtub collection.
Fit & Orientation
Single-ended in 1700 × 800 mm, 610 mm high
The single FT025 size is 1700 mm long, 800 mm wide and 610 mm high, or 67 by 31.5 by 24.0 inches.
- Overall Size
- 67" × 31.5" × 24.0" (1700 × 800 × 610 mm)
- Backrest
- Single-ended, drain at the foot end
- Faucet Mounting
- No tap holes; floor-standing or wall-mounted filler
- Base
- Flat to floor
Decide which end of the room gets the backrest before the floor waste is set, because the drain position fixes the orientation. A wall faucet suits a layout where the foot end meets a wall.
The drain offset for FT025 is confirmed on the approved drawing issued at quotation.
Construction & Finish
Acrylic body with rounded vertical corners
FT025 is formed from pure acrylic sheet in white, with straight sides and rounded vertical corners.
White
Straight sides, soft corners
Straight sides and a flat deck give FT025 a rectangular look, and the rounded vertical corners take the edge off where legs pass close to the tub.
The sheen of FT025 is confirmed on the approval sample, and deliveries are accepted against it.
A wide deck can scratch in transit if cartons are stacked on it, so specify top protection in the packing.
Hold the approved sample for incoming inspection.
Compliance
Compliance documents for FT025
Attach the approved drawing to the file so installers can see which end of FT025 carries the drain.
Compliance documents for FT025 are matched to your destination market. Before submittal, ask for the document references and validity date for SKU FT025.
Include the destination market when you write in, and the reply will be issued within 12 business hours.
Procurement
Ordering FT025
The single-ended FT025 runs on a lead time of 30-45 days after sample approval.
- Standard Lead Time
- 30-45 days after sample approval
- Quote Reply
- within 12 business hours
Because the tub is single-ended, send room plans with the enquiry if the drain end needs to line up with an existing floor waste.
Include these details with the RFQ
- Quantity of FT025
- Faucet position at the foot end
- Drain and slot overflow trim
- Destination market and port
- Carton marking or own-brand label
- Delivery window
The quotation confirms the lead time for your order.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request