Round Cylinder Freestanding Tub on Recessed Plinth, 55 in Diameter
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB D-8028 is a round freestanding bathtub in gloss white acrylic, shaped as a true cylinder with vertical walls and a slim rim. The shell stands on a slightly recessed plinth ring set in from the wall. It is made in one size, SKU D-8028, at 1400 × 1400 × 600 mm (55 × 55.1 × 23.6 in), with the drain at the center of the circle, 700 mm from the outer edge.
The rim has no tap holes, so a floor-standing or wall-mounted faucet fills the tub. A quotation for the D-8028 round tub is returned within 12 business hours. Short-footprint options are collected under small bathtubs.
More in Small Bathtubs
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of D-8028
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Finish & Form
A round freestanding bathtub in gloss white acrylic
Pure acrylic sheet, gloss white, wraps this freestanding tub as one continuous curved face. Vertical walls run all the way round, with no ends and no corners to interrupt the gloss.
Oval and rectangular freestanding bathtubs in the range have a long axis and a head end. A round freestanding bathtub has neither, so there is no orientation to decide on site.
Longer freestanding bathtubs need a long wall. D-8028 asks instead for an even circle of clear floor, which suits a compact modern bathroom where a long freestanding tub would not turn.
A cylinder has no flat side to rest on in the carton. Ask how the shell is braced for transit, and check the rim and the base ring on arrival.
Specifications
D-8028 diameter, height and depth
One SKU covers the model: D-8028, a circle 1400 mm across and 600 mm high.
- D-8028
- 55" × 55.1" × 23.6" (1400 × 1400 × 600 mm)
- Plan
- Round, drain at center, 700 mm from the outer edge
- Inner Depth
- 460 mm (18.1 in) and 470 mm (18.5 in) on the dimension drawing
- Base
- Recessed plinth ring
- Faucet Mounting
- Floor-standing or wall-mounted
Read the 1400 mm figure as a diameter, so it applies in every direction. A tub of this form needs the same clearance on every side, which is easier to draw as a circle than as a rectangle.
Both inner depths of the freestanding bathtub, 460 mm and 470 mm, come from the dimension drawing. Use them, not the 600 mm overall height, when you judge how deep the water sits for a bather.
Among freestanding bathtubs this is a compact footprint; for shorter still, see our small bathtubs collection.
Room Planning
Setting a 1400 mm circle into a plan
Draw the freestanding tub as a circle on the bathroom layout, then add working space around it.
Mark the center first. The drain sits there, 700 mm from the outer edge, so the floor waste and the tub share a single reference point, which is simpler than laying out freestanding bathtubs with a long axis.
Across 1400 mm, with the drain 700 mm from the outer edge, the drain sits at the exact center of the circle. Measure from that point to each wall and to the doorway to confirm the whole circle fits with working space around it.
Keep doors, vanities and radiators clear of the circle. Because a round plan has no head or foot, the walls it faces matter less than the space around it.
Lay out the faucet before the finishes. A floor-standing filler can go at any point on the circle, so choose the side that suits the room.
Configuration
Round plan, recessed base, slim rim
Center drain, equal on every side
With a center drain at the middle of the circle, the floor waste goes under the center of the tub and every side of the bowl is equal.
Recessed plinth ring
A base ring set in from the vertical wall carries the shell, and the recess leaves a shadow line at floor level.
Faucet anywhere on the circle
The slim rim has no tap holes. A floor-standing filler can stand at any point around the tub, or a wall spout can reach over the rim.
Receiving
Unpacking and inspecting a round shell
A round tub arrives differently from a long one, so give the receiving crew a short checklist.
Open the carton where the tub will be installed. Look first at the base ring, because it is the part that meets the floor, then check the rim.
Freestanding bathtubs arrive with the gloss intact only if the carton is sound, so inspect the surface in raking light for scuffs, and compare the white tone with the approved sample. Record any damage with photos of the carton before it is discarded.
Quote the SKU D-8028 and the carton marking in any report to SANIKB, so the shell can be traced quickly.
Compliance
One document set for one round freestanding tub
No length variants means no per-SKU paperwork split: one model code appears on every document.
Compliance documents for D-8028 are matched to your destination market. Because it is the only size, a single document set covers every unit in an order of this model.
Ask for the current certificate number when you enquire, and name the destination market so the right documents are prepared.
Quotation
Quoting a round freestanding bathtub for your project
A 1400 mm round shell loads differently from a long tub when a container is planned, so ask for carton dimensions at quotation.
- MOQ
- 20 pcs · 1×40HQ
- Lead Time
- 30-45 days after sample approval
Buyers who stock one compact freestanding tub for several room types can fill a container with this single SKU, since it has no length variants to balance and no mixed quantities to split.
Name the room types in the enquiry, for example a suite bathroom and a standard room, so the single SKU is quoted against each quantity. Add the destination port so carton and container planning can be confirmed together.
Tell us
- Quantity of D-8028 by room type
- Floor-standing or wall-mounted faucet
- Destination market and port
- Required documents
- Carton size and bracing
- Shipping window
Treat lead time as indicative until the quotation is issued.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request